GripEdgeTools

▶

▶ 21.9K ❤ 0 💬 0

Have you ever run into this? You’re trying to loosen a fastener, but you can’t get the bit fully seated. That’s where our GripEdge RPT Ball Star with Rounding Prevention Technology comes in. It provides up to 15.5 degrees of pivot so you can access the fastener at an angle. It also features a round bar design, comes in sizes T10 through T50, and measures 6 inches overall. #automotivetechnician #mechanictools #repairshop #automotiverepair #gripedge

▶

▶ 14.1K ❤ 0 💬 0

This standard star tool rounded out this star fastener. So we switched over to our GripEdge RPT Star with Rounding Prevention Technology and were able to remove it. These are a complete replacement for your standard star tools, helping prevent damage from happening in the first place. #mechanictools #repairshop #handtools #enginerepair #gripedgetools

▶

▶ 62.4K ❤ 0 💬 0

This is how to remove a rounded-out Hex Drain plug with a GripEdge G-FORS Broken Bolt Extractor! It is a straight-cut, non-tapered design where you can both tighten and loosen to break seized fasteners free. Then one you remove it use the foreign object removal sleeve to push the drain plug right off of the extractor #mechanictools #repairshop #toolset #enginerepair #gripedge

▶

▶ 136.4K ❤ 0 💬 0

This Hex fastener is in a tight-access area. To remove it, we are using our GripEdge 1/4" Drive RPT Dual Action Driver Hex and 1/4" Dual Action Driver Ratchet to loosen it up. Together, they offer 22 mm of access to get into tight-access areas and help prevent damage from happening with Rounding Prevention Technology. #mechanictools #enginerepair #repairshop #toolset #gripedge

▶

▶ 5.5K ❤ 0 💬 0

This is a rusted and seized exhaust manifold stud and we are going to use our GripEdge 1/4" Drive G-FORS Deep Socket Extractor to remove it. It is a straight-cut, non-tapered design which allows you to both tighten and loosen to break seized fasteners, bolts, and studs free. Then once you remove the stud use our Foreign object Removal Rod to push the stud right out of the extractor! #automotivetechnician #mechanictips #automotivetools #repairshop #gripedge

▶

▶ 18.8K ❤ 0 💬 0

If you have ever ran into a rusted and seized set screw this tool can help you out. It is our GripEdge 1/4" Drive RPT Long Hex with Rounding Prevention Technology. It is a complete replacement for your standard tools and helps prevents damage from happening to new and slightly damaged fasteners in the first place. #automotiverepair #automotivetechnician #mechanic #mechanictips #gripedge

▶

▶ 14.3K ❤ 0 💬 0

Here’s how to remove a rusted hex fastener in a tight-access area using our GripEdge RPT 3/8" Drive Dual Action Driver. At just 27 mm long, it gives you two ways to drive it, a 17 mm wrench or a 3/8" drive ratchet. Plus, it features our Rounding Prevention Technology to help prevent damage to the fastener in the first place! #automotiverepair #enginerepair #automotivetools #handtool #gripedge

▶

▶ 12K ❤ 0 💬 0

This is how to remove a rusted and seized stud with a GripEdge G-FORS Deep Socket Extractor and a Electric Hammer. We first hammered on the extractor then used the bi-directional design to both tighten and loosen to break the stud free Next we used the foreign object removal rod to push the stud right out of the extractor! #automotiverepair #repairshop #mechaniclife #handtools #gripedge

▶

▶ 42.1K ❤ 0 💬 0

Here’s how to remove a rounded-out hex drain plug with our GripEdge G-FORS Broken Bolt Extractor! PN:BBX14S Its straight-cut, non-tapered design gives you bi-directional control to both tighten and loosen to help break seized fasteners free. Once it’s removed, use the removal sleeve to push the fastener right out of the extractor! #automotivetechnician #automotiverepair #professionaltools #technician #gripedge

▶

▶ 5M ❤ 0 💬 0

RPT Socket Extractors are straight-cut and bi-directional. Unlike other socket extractors, these can be turned in BOTH forward and reverse to help break free those stuck fasteners. Button head or cap screw? No problem! Only a small amount of material is needed to bite down and lock in. If it’s damaged or stripped above the surface, you can grip and remove it with ease 💪 Check out the sets ➡️ http://rb.gy/3wwqpo Or click the link in our bio #newtools #enginerepair #automotive #mechanic #technician #GripEdge #RPT #Extractors #TorxTools #fypシ゚

▶

▶ 200.5K ❤ 0 💬 0

Have you seen the GripEdge G-FORS Extractors? Perfect for broken bolts, studs, and stripped-out flush-mounted fasteners. These extractors are bi-directional to allow you to work them back and forth to break loose the issue. #GripEdge #GripEdgeTools #LevelUp #Extractors #Mechanic #NewTools #toolsforsuccess #electricians #electriciansoftiktok #fypviralシ #fypシ

▶

▶ 44.9K ❤ 0 💬 0

GripEdge Tools HEX Bits - How They Work   #GripEdgeTools #tooloftheday #tooltruck #sockets #Toolsoftheday #newtools #handtools #tooljunkie #qualitytools #diy #technology #hextools #allenkeysolutions #FYP #Trending #allenkey #allensockets #3danimation #animation