function.3d

function.3d

@function.3d

📩 [email protected]

function.3d adalah kreator TikTok dengan 538.2K pengikut dan 11M like. Videonya rata-rata ditonton 1.5M kali, dengan tingkat engagement 12.0%. Hashtag yang paling sering dipakai: #3dprinting, #3dprint dan #bambulaba1.

https://linktr.ee/function.3d functionddd@gmail.com
538.2K
Pengikut
124
Mengikuti
11M
Like
1.5M
Rata-rata tayangan
Engagement: 12.0% Spanyol 🗣️ Inggris
#3dprinting#3dprint#bambulaba1#flashforge#recycledplastic #3dprinting#3dprint#bambulaba1#flashforge#recycledplastic#biqu#creator5#kobra3v2#ad5x#snapmaker10thanniversary#anycubickobra3v2#kobra3v2combo#loveandshare#flashforgead5x#snapmakeru1#3dprinter#snapmaker#anycubic10thanniversary
Kolaborasi: @snapmaker_global @flashforge @bambulab @biqu_makers @alvaro @anycubic
538.2K
Pengikut
11M
Total like
1.5M
Rata-rata tayangan
170
Video
124
Mengikuti
28.2K
Favorit
12.0%
Engagement

Pertumbuhan & Prediksi

+700
Pengikut / 13d
+0
Total like / 13d
538.6K
Prediksi 7 hari (Pengikut)
539.8K
Prediksi 30 hari (Pengikut)

+700 pengikut dalam 13 hari terakhir. Prediksi: 538.6K pengikut dalam 7 hari, 539.8K dalam 30 hari (11M suka).

Jumlah pengikut TikTok per hari

Pada 2026-10-02, function.3d memiliki 538.2K pengikut TikTok (+0 dibanding hari sebelumnya).

TanggalPengikutPerubahan
538.2K+0
538.2K+0
538.2K+0
538.2K+0 (2d)
538.2K+0
538.2K+0
538.2K+0 (2d)
538.2K+100
538.1K+100
538K+200
537.8K+300

Kontak dan tautan

Email bisnisfunctionddd@gmail.com

Perkiraan penghasilan

Perkiraan tarif per postingan berbayar: $2.7K hingga $13.4K, dengan asumsi sekitar 5 sampai 25 dolar per 1.000 pengikut. Ini hanya perkiraan dari ukuran audiens, bukan penghasilan yang dilaporkan.

Pertumbuhan dari waktu ke waktu

Pengikut

Memuat…

Total like

Memuat…

Rata-rata tayangan

Memuat…

Jangkauan %

Memuat…

Terakhir diperbarui:

Profil TikTok

Video terbaru

100% 3D Printed Yarn Winder Printed on the @snapmaker_global U1. It changes toolheads in under 5 seconds, allowing multi-color printing up to 5x faster and with up to 5x less waste. 🖨️ Snapmaker U1 ✨ The Consumer Toolchanger 3D Printer link in bio STL: makerworld 3156374 Huge thanks to Snapmaker for letting me test out the new U1! #Snapmaker #SnapmakerU1 #Snapmaker10thAnniversary #3DPrinting
▶
▶ 60.4K ❤ 0 💬 0

100% 3D Printed Yarn Winder Printed on the @snapmaker_global U1. It changes toolheads in under 5 seconds, allowing multi-color printing up to 5x faster and with up to 5x less waste. 🖨️ Snapmaker U1 ✨ The Consumer Toolchanger 3D Printer link in bio STL: makerworld 3156374 Huge thanks to Snapmaker for letting me test out the new U1! #Snapmaker #SnapmakerU1 #Snapmaker10thAnniversary #3DPrinting

Finally, waste-free multicolor printing—now I really have no qualms about printing in multiple colors with my homemade filaments from PET plastic bottles. 3D printer: @Flashforge 3D #Creator5 STL: Flexi Factory Skeleton Ankylosaurus #3dprinting #3dprint #recycledplastic
▶
▶ 5M ❤ 0 💬 0

Finally, waste-free multicolor printing—now I really have no qualms about printing in multiple colors with my homemade filaments from PET plastic bottles. 3D printer: @Flashforge 3D #Creator5 STL: Flexi Factory Skeleton Ankylosaurus #3dprinting #3dprint #recycledplastic

I’ve been testing the Flashforge Creator 5, and I’m thoroughly impressed. The material waste management is fantastic. It’s also incredibly versatile on the software side, offering smooth Wi-Fi connectivity with both its own slicer and OrcaSlicer. The build is robust, the print quality is excellent, and it features a truly unique design choice: putting the tool storage and spools on the side instead of the back. It’s an unexpected but incredibly practical layout. Big shoutout to @Flashforge 3D! Thank you for backing new ideas and bringing this partnership to life! #3dprinting #3dprinter #Flashforge #Creator5
▶
▶ 32.5K ❤ 0 💬 0

I’ve been testing the Flashforge Creator 5, and I’m thoroughly impressed. The material waste management is fantastic. It’s also incredibly versatile on the software side, offering smooth Wi-Fi connectivity with both its own slicer and OrcaSlicer. The build is robust, the print quality is excellent, and it features a truly unique design choice: putting the tool storage and spools on the side instead of the back. It’s an unexpected but incredibly practical layout. Big shoutout to @Flashforge 3D! Thank you for backing new ideas and bringing this partnership to life! #3dprinting #3dprinter #Flashforge #Creator5

Splicing PET Filament Made Simple Turning recycled bottle PET into continuous printable filament using a simple and effective splicing method. 3D printer: @BAMBULAB Official A1 BuildPlate: @BIQU_Makers CryoGrip Pro Glacier Light bar: BIQU RGB LED status STL:  https://cults3d.com/:521261 Buy: https://function3d.xyz DIY: https://function3d.xyz/petalot-kit BOM: https://function3d.xyz/bom FAQ: https://function3d.xyz/faqs GitHub: https://github.com/function3d/petalot @Alvaro cubi cubi!# picis #& #3DPrinting #biqu #bambulaba1
▶
▶ 31K ❤ 0 💬 0

Splicing PET Filament Made Simple Turning recycled bottle PET into continuous printable filament using a simple and effective splicing method. 3D printer: @BAMBULAB Official A1 BuildPlate: @BIQU_Makers CryoGrip Pro Glacier Light bar: BIQU RGB LED status STL:  https://cults3d.com/:521261 Buy: https://function3d.xyz DIY: https://function3d.xyz/petalot-kit BOM: https://function3d.xyz/bom FAQ: https://function3d.xyz/faqs GitHub: https://github.com/function3d/petalot @Alvaro cubi cubi!# picis #& #3DPrinting #biqu #bambulaba1

Turning a bottle into filament… and testing BIQU build plates 3D printers: 🖨️ Voxelab D1 🖨️ @Anycubic Official Kobra 3 V2 🖨️ @BAMBULAB Official A1 I’m testing the new @BIQU_Makers CryoGrip Pro Glacier build plates Multi Color — engineered for insane adhesion, even at low temps. 💥 Designed for the A1… 👉 but I mounted them on the other printers using custom 3D-printed mods I designed Results: ✔️ Perfect first layer ✔️ Crazy strong grip ✔️ And they look amazing in color 😍 Honestly… they work so well and look so good, they’re staying on all three 🔥 #3DPrinting #biqu #bambulaba1 #kobra3v2
▶
▶ 9.1M ❤ 0 💬 0

Turning a bottle into filament… and testing BIQU build plates 3D printers: 🖨️ Voxelab D1 🖨️ @Anycubic Official Kobra 3 V2 🖨️ @BAMBULAB Official A1 I’m testing the new @BIQU_Makers CryoGrip Pro Glacier build plates Multi Color — engineered for insane adhesion, even at low temps. 💥 Designed for the A1… 👉 but I mounted them on the other printers using custom 3D-printed mods I designed Results: ✔️ Perfect first layer ✔️ Crazy strong grip ✔️ And they look amazing in color 😍 Honestly… they work so well and look so good, they’re staying on all three 🔥 #3DPrinting #biqu #bambulaba1 #kobra3v2

Giving Old Clothespins a 3D Upgrade 3D printer: @Flashforge 3D AD5X #3dprinting #BambuLabA1 #flashforgead5x #anycubickobra3v2
▶
▶ 764.4K ❤ 0 💬 0

Giving Old Clothespins a 3D Upgrade 3D printer: @Flashforge 3D AD5X #3dprinting #BambuLabA1 #flashforgead5x #anycubickobra3v2

Clean and cut #3dprinting #3dprint #recycledplastic
▶
▶ 49.4K ❤ 0 💬 0

Clean and cut #3dprinting #3dprint #recycledplastic

Timelapse in Vase Mode? Yes, It Is Possible Setting up a timelapse for a vase mode print — something most slicers and printers say is impossible. Printing the Octahedroflake, a higher-dimensional analog of the Sierpinski Triangle, in single-perimeter vase mode using PET filament I made myself, on a @Flashforge 3D AD5X. STL: “The Octahedroflake” on Printables. #3dprinting #3dprint #Flashforge #AD5X
▶
▶ 36.5K ❤ 0 💬 0

Timelapse in Vase Mode? Yes, It Is Possible Setting up a timelapse for a vase mode print — something most slicers and printers say is impossible. Printing the Octahedroflake, a higher-dimensional analog of the Sierpinski Triangle, in single-perimeter vase mode using PET filament I made myself, on a @Flashforge 3D AD5X. STL: “The Octahedroflake” on Printables. #3dprinting #3dprint #Flashforge #AD5X

Testing PET filament on the @Flashforge 3D AD5X Settings for PET: 256°C, 65°C, flow: 1.2, max volumetric speed: 4.5mm3/s, layer fan: 20-40% Thanks to flashforge for allowing me to test the AD5X #Flashforge #AD5X #3Dprinting #3Dprint #recycledplastic
▶
▶ 140K ❤ 0 💬 0

Testing PET filament on the @Flashforge 3D AD5X Settings for PET: 256°C, 65°C, flow: 1.2, max volumetric speed: 4.5mm3/s, layer fan: 20-40% Thanks to flashforge for allowing me to test the AD5X #Flashforge #AD5X #3Dprinting #3Dprint #recycledplastic

Two Mods for the Anycubic Kobra 3 Combo: Timelapse + PET Spools holder I design and print two upgrades for the @Anycubic Official Kobra 3 Combo: a Bluetooth button mount for timelapses and a top adapter to use my recycled PET bottle filament spools Anycubic 10th Anniversary Giveaway, Show your order & win big #3Dprinting #Kobra3V2Combo #kobra3v2 #LoveAndShare #Anycubic10thAnniversary
▶
▶ 60.5K ❤ 0 💬 0

Two Mods for the Anycubic Kobra 3 Combo: Timelapse + PET Spools holder I design and print two upgrades for the @Anycubic Official Kobra 3 Combo: a Bluetooth button mount for timelapses and a top adapter to use my recycled PET bottle filament spools Anycubic 10th Anniversary Giveaway, Show your order & win big #3Dprinting #Kobra3V2Combo #kobra3v2 #LoveAndShare #Anycubic10thAnniversary

Lihat @function.3d di TikTok 🚀

Pertanyaan yang sering diajukan

Berapa jumlah pengikut function.3d?

Per 2026-10-02, function.3d (@function.3d) memiliki 538.2K pengikut TikTok.

Apa email function.3d?

function.3d mencantumkan [email protected] sebagai kontak di profil TikTok.

Secepat apa function.3d bertumbuh di TikTok?

+700 pengikut dalam 13 hari terakhir. Prediksi: 538.6K pengikut dalam 7 hari, 539.8K dalam 30 hari (11M suka).

Kreator serupa

Top kreator TikTok #3dprinting di Spanyol

Lihat semua →

@function.3d masuk dalam

Top kreator TikTok #3dprinting di SpanyolTop kreator TikTok #3dprinting di duniaTop kreator TikTok #3dprint di SpanyolTop kreator TikTok #3dprint di duniaTop kreator TikTok #bambulaba1 di SpanyolTop kreator TikTok #bambulaba1 di duniaTop kreator TikTok di SpanyolInfluencer TikTok menengah yang sedang tren di Spanyol