kps_eu

▶

▶ 270 ❤ 0 💬 0

The KPS DCM3000 is a versatile True RMS AC clamp meter designed for electricians who need to measure, check and troubleshoot electrical installations quickly and efficiently. ✔️ Up to 1000 A AC ✔️ True RMS technology ✔️ Up to 1000 V AC/DC ✔️ Non-contact voltage detection ✔️ Resistance, continuity & diode testing ✔️ MAX/MIN & HOLD functions ✔️ Integrated work light From electrical panels and installations to maintenance and troubleshooting, the KPS DCM3000 puts essential measurement functions right at your fingertips. Your everyday tool for electrical measurement is waiting for you! Find out more at www.kps-intl.com #kps #DCM3000 #TrueRMS #clampmeter #Measuringinstruments #electricians

▶

▶ 262 ❤ 0 💬 0

Not every electrical measurement happens in an easy-to-reach place 🤷‍♂️ Tight panels, crowded installations, hard-to-reach conductors… That’s where you need a tester that works with you, not against you. The KPS TP5000HY voltage detector combines a 39 mm jaw opening with a detachable, replaceable test tip, giving electricians the access and flexibility needed for real-world measurements. And with TRMS ACV/ACA, you can rely on accurate readings even in electrically noisy environments. Built for the job site: ✔️9999-count digital display ✔️Illuminated LED bar graph ✔️39 mm jaw opening ✔️Conductors up to 16 mm / 4/0 AWG ✔️TRMS ACV/ACA ✔️Detachable & replaceable test tip ✔️IP65 dust & splash protection When the installation gets difficult, your tester shouldn’t ➡️ kps-intl.com/en/ #KPS #Measuringinstruments #TP5000HY #Voltagedetector #Electricians

▶

▶ 276 ❤ 0 💬 0

What if you could fully test an EV charger… without having an EV? That’s exactly what the KPS EVCHECK2010 is designed for. It simulates the vehicle and its charging states, allowing you to verify how an EV charging point behaves before putting a real vehicle on the line. With the EVCHECK2010, you can: · Check the PE conductor with the earthing pre-test and verify it is free from hazardous voltage. · Test the charging cable capacity using the PP selector. · Simulate vehicle states with the CP selector: And when paired with the KPS MULTICHECK6010, you get a complete EVSE testing setup. For quick field checks, connect the pocket-sized KPS FASTCHECK3010 directly to the rear port to test wiring, loop impedance and RCDs. One complete setup. No EV required! Have you got yours yet? #KPS #EVCHECK2010 #EVchargingstationtester #EV