Khabane lame
@khaby.lame
#1
Se vuoi ridere sei nel posto giusto😎 If u wanna laugh u r in the right place😎
- Followers
- 163M
- Likes
- 2.7B
- Views
- 28.9M
- Engage
- 1.2%
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim is a TikTok creator in the United States with 1.2M followers and 58.4M likes. Their videos average 1.7K views, an engagement rate of 16.4%. Most-used hashtags: #tiktokshopcybermonday, #tiktokshopblackfriday and #discoveryourgift.
1.2M
Followers
0
Following
58.4M
Likes
1.7K
Avg views
Engagement: 16.4%
United States
🗣️ English
1.2M
Followers
58.4M
Total likes
1.7K
Avg views
296
Videos
Estimated earnings
Estimated rate per sponsored post: $6K to $30K, based on roughly $5 to $25 per 1,000 followers. This is an estimate from audience size, not reported income.
Last updated:
TikTok profile
Recent videos
Latest video: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Frequently asked questions
How many followers does Tim have?
Tim (@letsdrillit) has 1.2M TikTok followers as of 2026-10-26.
Similar creators
View all →
Top TikTok Creators in the United States
charli d’amelio
@charlidamelio
#2
orca enthusiast meg thee stallion fan i post on youtube on saturdays (for the most part)
- Followers
- 160.3M
- Likes
- 12.4B
- Views
- 2.1M
- Engage
- 2.3%
MrBeast
@mrbeast
#3
Checkout My New Book!👇
- Followers
- 145.1M
- Likes
- 1.6B
- Views
- 25.7M
- Engage
- 2.3%
TikTok
@tiktok
#4
Your next discovery is waiting on TikTok.
- Followers
- 96.5M
- Likes
- 465.3M
- Views
- 553.7K
- Engage
- 0.3%
Bella Poarch
@bellapoarch
#5
Picnic At The Cemetery
- Followers
- 91.5M
- Likes
- 2.4B
- Views
- 2.2M
- Engage
- 17.4%
Addison Rae
@addisonre
#6
- Followers
- 87.6M
- Likes
- 5.3B
- Views
- 8.1M
- Engage
- 14.9%
Zach King
@zachking
#7
Bringing a little more wonder into the world, 15 seconds at a time
- Followers
- 86.8M
- Likes
- 1.3B
- Views
- 220.6M
- Engage
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
Hola linduras ✨ Únete al grupo 👇🏻
- Followers
- 83.4M
- Likes
- 4.3B
- Views
- 5.9M
- Engage
- 2.3%
@letsdrillit appears in
Español
Tim (@letsdrillit) – Estadísticas de TikTok: 1.2M seguidores
Tim (@letsdrillit) — estadísticas de TikTok: 1.2M seguidores, 58.4M me gusta, 1.7K reproducciones promedio, 16.4% de interacción.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim es creador de contenido en TikTok, con 1.2M seguidores y 58.4M me gusta. Sus videos promedian 1.7K reproducciones, con una tasa de interacción de 16.4%. Hashtags más usados: #tiktokshopcybermonday, #tiktokshopblackfriday y #discoveryourgift.
1.2M
Seguidores
0
Siguiendo
58.4M
Me gusta
1.7K
Vistas medias
Interacción: 16.4%
Estados Unidos
🗣️ inglés
1.2M
Seguidores
58.4M
Me gusta totales
1.7K
Vistas medias
296
Videos
Ingresos estimados
Tarifa estimada por publicación patrocinada: de $6K a $30K, calculada con unos 5 a 25 USD por cada 1.000 seguidores. Es una estimación según el tamaño de la audiencia, no ingresos declarados.
Última actualización:
Perfil de TikTok
Videos recientes
Último vídeo: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Preguntas frecuentes
¿Cuántos seguidores tiene Tim?
A 2026-10-26, Tim (@letsdrillit) tiene 1.2M seguidores en TikTok.
Creadores similares
Ver todo →
Top creadores de TikTok en Estados Unidos
Khabane lame
@khaby.lame
#1
- Seguidores
- 163M
- Me gusta
- 2.7B
- Vistas
- 28.9M
- Interac.
- 1.2%
charli d’amelio
@charlidamelio
#2
- Seguidores
- 160.3M
- Me gusta
- 12.4B
- Vistas
- 2.1M
- Interac.
- 2.3%
MrBeast
@mrbeast
#3
- Seguidores
- 145.1M
- Me gusta
- 1.6B
- Vistas
- 25.7M
- Interac.
- 2.3%
TikTok
@tiktok
#4
- Seguidores
- 96.5M
- Me gusta
- 465.3M
- Vistas
- 553.7K
- Interac.
- 0.3%
Bella Poarch
@bellapoarch
#5
- Seguidores
- 91.5M
- Me gusta
- 2.4B
- Vistas
- 2.2M
- Interac.
- 17.4%
Addison Rae
@addisonre
#6
- Seguidores
- 87.6M
- Me gusta
- 5.3B
- Vistas
- 8.1M
- Interac.
- 14.9%
Zach King
@zachking
#7
- Seguidores
- 86.8M
- Me gusta
- 1.3B
- Vistas
- 220.6M
- Interac.
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Seguidores
- 83.4M
- Me gusta
- 4.3B
- Vistas
- 5.9M
- Interac.
- 2.3%
@letsdrillit aparece en
Português
Tim (@letsdrillit) – Estatísticas do TikTok: 1.2M seguidores
Tim (@letsdrillit) — estatísticas do TikTok: 1.2M seguidores, 58.4M curtidas, 1.7K visualizações médias, 16.4% de engajamento.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim é criador de conteúdo no TikTok, com 1.2M seguidores e 58.4M curtidas. Os vídeos têm em média 1.7K visualizações, com taxa de engajamento de 16.4%. Hashtags mais usadas: #tiktokshopcybermonday, #tiktokshopblackfriday e #discoveryourgift.
1.2M
Seguidores
0
Seguindo
58.4M
Curtidas
1.7K
Média de views
Engajamento: 16.4%
Estados Unidos
🗣️ inglês
1.2M
Seguidores
58.4M
Total de curtidas
1.7K
Média de views
296
Vídeos
Ganhos estimados
Valor estimado por post patrocinado: $6K a $30K, com base em cerca de US$ 5 a US$ 25 por 1.000 seguidores. É uma estimativa pelo tamanho da audiência, não uma renda declarada.
Última atualização:
Perfil no TikTok
Vídeos recentes
Último vídeo: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Perguntas frequentes
Quantos seguidores Tim tem?
Em 2026-10-26, Tim (@letsdrillit) tem 1.2M seguidores no TikTok.
Criadores parecidos
Ver tudo →
Maiores criadores do TikTok em Estados Unidos
Khabane lame
@khaby.lame
#1
- Seguidores
- 163M
- Curtidas
- 2.7B
- Views
- 28.9M
- Engaj.
- 1.2%
charli d’amelio
@charlidamelio
#2
- Seguidores
- 160.3M
- Curtidas
- 12.4B
- Views
- 2.1M
- Engaj.
- 2.3%
MrBeast
@mrbeast
#3
- Seguidores
- 145.1M
- Curtidas
- 1.6B
- Views
- 25.7M
- Engaj.
- 2.3%
TikTok
@tiktok
#4
- Seguidores
- 96.5M
- Curtidas
- 465.3M
- Views
- 553.7K
- Engaj.
- 0.3%
Bella Poarch
@bellapoarch
#5
- Seguidores
- 91.5M
- Curtidas
- 2.4B
- Views
- 2.2M
- Engaj.
- 17.4%
Addison Rae
@addisonre
#6
- Seguidores
- 87.6M
- Curtidas
- 5.3B
- Views
- 8.1M
- Engaj.
- 14.9%
Zach King
@zachking
#7
- Seguidores
- 86.8M
- Curtidas
- 1.3B
- Views
- 220.6M
- Engaj.
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Seguidores
- 83.4M
- Curtidas
- 4.3B
- Views
- 5.9M
- Engaj.
- 2.3%
@letsdrillit aparece em
Français
Tim (@letsdrillit) – Statistiques TikTok: 1.2M abonnés | TokRanks
Tim (@letsdrillit) — statistiques TikTok: 1.2M abonnés, 58.4M j'aime, 1.7K vues moyennes, 16.4% d'engagement.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim est un créateur TikTok, avec 1.2M abonnés et 58.4M j'aime. Ses vidéos cumulent en moyenne 1.7K vues, pour un taux d'engagement de 16.4%. Hashtags les plus utilisés: #tiktokshopcybermonday, #tiktokshopblackfriday et #discoveryourgift.
1.2M
Abonnés
0
Abonnements
58.4M
J'aime
1.7K
Vues moyennes
Engagement: 16.4%
États-Unis
🗣️ anglais
1.2M
Abonnés
58.4M
Total de j'aime
1.7K
Vues moyennes
296
Vidéos
Revenus estimés
Tarif estimé par publication sponsorisée: de $6K à $30K, sur la base d'environ 5 à 25 $ pour 1 000 abonnés. C'est une estimation à partir de la taille de l'audience, pas un revenu déclaré.
Dernière mise à jour:
Profil TikTok
Vidéos récentes
Dernière vidéo: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Questions fréquentes
Combien d'abonnés a Tim ?
Au 2026-10-26, Tim (@letsdrillit) compte 1.2M abonnés sur TikTok.
Créateurs similaires
Tout voir →
Top créateurs TikTok (États-Unis)
Khabane lame
@khaby.lame
#1
- Abonnés
- 163M
- J'aime
- 2.7B
- Vues
- 28.9M
- Engag.
- 1.2%
charli d’amelio
@charlidamelio
#2
- Abonnés
- 160.3M
- J'aime
- 12.4B
- Vues
- 2.1M
- Engag.
- 2.3%
MrBeast
@mrbeast
#3
- Abonnés
- 145.1M
- J'aime
- 1.6B
- Vues
- 25.7M
- Engag.
- 2.3%
TikTok
@tiktok
#4
- Abonnés
- 96.5M
- J'aime
- 465.3M
- Vues
- 553.7K
- Engag.
- 0.3%
Bella Poarch
@bellapoarch
#5
- Abonnés
- 91.5M
- J'aime
- 2.4B
- Vues
- 2.2M
- Engag.
- 17.4%
Addison Rae
@addisonre
#6
- Abonnés
- 87.6M
- J'aime
- 5.3B
- Vues
- 8.1M
- Engag.
- 14.9%
Zach King
@zachking
#7
- Abonnés
- 86.8M
- J'aime
- 1.3B
- Vues
- 220.6M
- Engag.
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Abonnés
- 83.4M
- J'aime
- 4.3B
- Vues
- 5.9M
- Engag.
- 2.3%
@letsdrillit figure dans
Deutsch
Tim (@letsdrillit) – TikTok-Statistiken: 1.2M Follower | TokRanks
Tim (@letsdrillit) — TikTok-Statistiken: 1.2M Follower, 58.4M Likes, 1.7K Aufrufe im Schnitt, 16.4% Engagement.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim ist TikTok-Creator mit 1.2M Follower und 58.4M Likes. Die Videos erreichen im Schnitt 1.7K Aufrufe, bei einer Engagement-Rate von 16.4%. Meistgenutzte Hashtags: #tiktokshopcybermonday, #tiktokshopblackfriday und #discoveryourgift.
1.2M
Follower
0
Folgt
58.4M
Likes
1.7K
Ø Aufrufe
Engagement: 16.4%
Vereinigte Staaten
🗣️ Englisch
1.2M
Follower
58.4M
Likes gesamt
1.7K
Ø Aufrufe
296
Videos
Geschätzte Einnahmen
Geschätzter Preis pro gesponserten Beitrag: $6K bis $30K, ausgehend von etwa 5 bis 25 US-Dollar pro 1.000 Follower. Das ist eine Schätzung nach Reichweite, kein gemeldetes Einkommen.
Zuletzt aktualisiert:
TikTok-Profil
Neueste Videos
Neuestes Video: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Häufige Fragen
Wie viele Follower hat Tim?
Am 2026-10-26 hat Tim (@letsdrillit) 1.2M TikTok-Follower.
Ähnliche Creator
Alle ansehen →
Top TikTok-Creator in Vereinigte Staaten
Khabane lame
@khaby.lame
#1
- Follower
- 163M
- Likes
- 2.7B
- Aufrufe
- 28.9M
- Engag.
- 1.2%
charli d’amelio
@charlidamelio
#2
- Follower
- 160.3M
- Likes
- 12.4B
- Aufrufe
- 2.1M
- Engag.
- 2.3%
MrBeast
@mrbeast
#3
- Follower
- 145.1M
- Likes
- 1.6B
- Aufrufe
- 25.7M
- Engag.
- 2.3%
TikTok
@tiktok
#4
- Follower
- 96.5M
- Likes
- 465.3M
- Aufrufe
- 553.7K
- Engag.
- 0.3%
Bella Poarch
@bellapoarch
#5
- Follower
- 91.5M
- Likes
- 2.4B
- Aufrufe
- 2.2M
- Engag.
- 17.4%
Addison Rae
@addisonre
#6
- Follower
- 87.6M
- Likes
- 5.3B
- Aufrufe
- 8.1M
- Engag.
- 14.9%
Zach King
@zachking
#7
- Follower
- 86.8M
- Likes
- 1.3B
- Aufrufe
- 220.6M
- Engag.
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Follower
- 83.4M
- Likes
- 4.3B
- Aufrufe
- 5.9M
- Engag.
- 2.3%
@letsdrillit erscheint in
Italiano
Tim (@letsdrillit) – Statistiche TikTok: 1.2M follower | TokRanks
Tim (@letsdrillit) — statistiche TikTok: 1.2M follower, 58.4M like, 1.7K visualizzazioni medie, 16.4% di engagement.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim è un creator di TikTok con 1.2M follower e 58.4M like. I suoi video fanno in media 1.7K visualizzazioni, con un tasso di engagement del 16.4%. Hashtag più usati: #tiktokshopcybermonday, #tiktokshopblackfriday e #discoveryourgift.
1.2M
Follower
0
Seguiti
58.4M
Like
1.7K
Visual. medie
Engagement: 16.4%
Stati Uniti
🗣️ inglese
1.2M
Follower
58.4M
Like totali
1.7K
Visual. medie
296
Video
Guadagni stimati
Tariffa stimata per post sponsorizzato: da $6K a $30K, calcolata su circa 5-25 dollari ogni 1.000 follower. È una stima basata sulla dimensione del pubblico, non un reddito dichiarato.
Ultimo aggiornamento:
Profilo TikTok
Video recenti
Ultimo video: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Domande frequenti
Quanti follower ha Tim?
Al 2026-10-26, Tim (@letsdrillit) ha 1.2M follower su TikTok.
Creator simili
Vedi tutti →
Top creator di TikTok in Stati Uniti
Khabane lame
@khaby.lame
#1
- Follower
- 163M
- Like
- 2.7B
- Visual.
- 28.9M
- Engag.
- 1.2%
charli d’amelio
@charlidamelio
#2
- Follower
- 160.3M
- Like
- 12.4B
- Visual.
- 2.1M
- Engag.
- 2.3%
MrBeast
@mrbeast
#3
- Follower
- 145.1M
- Like
- 1.6B
- Visual.
- 25.7M
- Engag.
- 2.3%
TikTok
@tiktok
#4
- Follower
- 96.5M
- Like
- 465.3M
- Visual.
- 553.7K
- Engag.
- 0.3%
Bella Poarch
@bellapoarch
#5
- Follower
- 91.5M
- Like
- 2.4B
- Visual.
- 2.2M
- Engag.
- 17.4%
Addison Rae
@addisonre
#6
- Follower
- 87.6M
- Like
- 5.3B
- Visual.
- 8.1M
- Engag.
- 14.9%
Zach King
@zachking
#7
- Follower
- 86.8M
- Like
- 1.3B
- Visual.
- 220.6M
- Engag.
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Follower
- 83.4M
- Like
- 4.3B
- Visual.
- 5.9M
- Engag.
- 2.3%
@letsdrillit compare in
Nederlands
Tim (@letsdrillit) – TikTok-statistieken: 1.2M volgers | TokRanks
Tim (@letsdrillit) — TikTok-statistieken: 1.2M volgers, 58.4M likes, 1.7K gemiddelde weergaven, 16.4% engagement.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim is een TikTok-creator met 1.2M volgers en 58.4M likes. De video's halen gemiddeld 1.7K weergaven, met een engagementpercentage van 16.4%. Meestgebruikte hashtags: #tiktokshopcybermonday, #tiktokshopblackfriday en #discoveryourgift.
1.2M
Volgers
0
Volgend
58.4M
Likes
1.7K
Gem. weergaven
Engagement: 16.4%
Verenigde Staten
🗣️ Engels
1.2M
Volgers
58.4M
Totaal likes
1.7K
Gem. weergaven
296
Video's
Geschatte inkomsten
Geschat tarief per gesponsorde post: $6K tot $30K, uitgaand van ongeveer 5 tot 25 dollar per 1.000 volgers. Dit is een schatting op basis van bereik, geen gemeld inkomen.
Laatst bijgewerkt:
TikTok-profiel
Recente video's
Nieuwste video: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Veelgestelde vragen
Hoeveel volgers heeft Tim?
Op 2026-10-26 heeft Tim (@letsdrillit) 1.2M TikTok-volgers.
Vergelijkbare creators
Alles bekijken →
Top TikTok-creators in Verenigde Staten
Khabane lame
@khaby.lame
#1
- Volgers
- 163M
- Likes
- 2.7B
- Weerg.
- 28.9M
- Engag.
- 1.2%
charli d’amelio
@charlidamelio
#2
- Volgers
- 160.3M
- Likes
- 12.4B
- Weerg.
- 2.1M
- Engag.
- 2.3%
MrBeast
@mrbeast
#3
- Volgers
- 145.1M
- Likes
- 1.6B
- Weerg.
- 25.7M
- Engag.
- 2.3%
TikTok
@tiktok
#4
- Volgers
- 96.5M
- Likes
- 465.3M
- Weerg.
- 553.7K
- Engag.
- 0.3%
Bella Poarch
@bellapoarch
#5
- Volgers
- 91.5M
- Likes
- 2.4B
- Weerg.
- 2.2M
- Engag.
- 17.4%
Addison Rae
@addisonre
#6
- Volgers
- 87.6M
- Likes
- 5.3B
- Weerg.
- 8.1M
- Engag.
- 14.9%
Zach King
@zachking
#7
- Volgers
- 86.8M
- Likes
- 1.3B
- Weerg.
- 220.6M
- Engag.
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Volgers
- 83.4M
- Likes
- 4.3B
- Weerg.
- 5.9M
- Engag.
- 2.3%
@letsdrillit staat in
Polski
Tim (@letsdrillit) – Statystyki TikToka: 1.2M obserwujących
Tim (@letsdrillit) — statystyki TikToka: 1.2M obserwujących, 58.4M polubień, 1.7K wyświetleń średnio, 16.4% zaangażowania.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim to twórca na TikToku: 1.2M obserwujących, 58.4M polubień. Filmy mają średnio 1.7K wyświetleń, a wskaźnik zaangażowania wynosi 16.4%. Najczęściej używane hashtagi: #tiktokshopcybermonday, #tiktokshopblackfriday i #discoveryourgift.
1.2M
Obserwujący
0
Obserwowani
58.4M
Polubienia
1.7K
Śr. wyświetlenia
Zaangażowanie: 16.4%
Stany Zjednoczone
🗣️ angielski
1.2M
Obserwujący
58.4M
Polubienia łącznie
1.7K
Śr. wyświetlenia
296
Filmy
Szacowane zarobki
Szacowana stawka za post sponsorowany: od $6K do $30K, przy założeniu około 5–25 USD za 1000 obserwujących. To szacunek na podstawie wielkości widowni, a nie zgłoszony dochód.
Ostatnia aktualizacja:
Profil na TikToku
Najnowsze filmy
Najnowszy film: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Najczęstsze pytania
Ilu obserwujących ma Tim?
Według stanu na 2026-10-26 Tim (@letsdrillit) ma 1.2M obserwujących na TikToku.
Podobni twórcy
Zobacz wszystko →
Top twórcy TikToka (Stany Zjednoczone)
Khabane lame
@khaby.lame
#1
- Obserwujący
- 163M
- Polubienia
- 2.7B
- Wyśw.
- 28.9M
- Zaang.
- 1.2%
charli d’amelio
@charlidamelio
#2
- Obserwujący
- 160.3M
- Polubienia
- 12.4B
- Wyśw.
- 2.1M
- Zaang.
- 2.3%
MrBeast
@mrbeast
#3
- Obserwujący
- 145.1M
- Polubienia
- 1.6B
- Wyśw.
- 25.7M
- Zaang.
- 2.3%
TikTok
@tiktok
#4
- Obserwujący
- 96.5M
- Polubienia
- 465.3M
- Wyśw.
- 553.7K
- Zaang.
- 0.3%
Bella Poarch
@bellapoarch
#5
- Obserwujący
- 91.5M
- Polubienia
- 2.4B
- Wyśw.
- 2.2M
- Zaang.
- 17.4%
Addison Rae
@addisonre
#6
- Obserwujący
- 87.6M
- Polubienia
- 5.3B
- Wyśw.
- 8.1M
- Zaang.
- 14.9%
Zach King
@zachking
#7
- Obserwujący
- 86.8M
- Polubienia
- 1.3B
- Wyśw.
- 220.6M
- Zaang.
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Obserwujący
- 83.4M
- Polubienia
- 4.3B
- Wyśw.
- 5.9M
- Zaang.
- 2.3%
@letsdrillit pojawia się w
Русский
Tim (@letsdrillit) – Статистика TikTok: 1.2M подписчиков
Tim (@letsdrillit) — статистика TikTok: 1.2M подписчиков, 58.4M лайков, 1.7K просмотров в среднем, вовлечённость 16.4%.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim — автор в TikTok: 1.2M подписчиков, 58.4M лайков. В среднем видео набирает 1.7K просмотров, вовлечённость — 16.4%. Самые частые хештеги: #tiktokshopcybermonday, #tiktokshopblackfriday и #discoveryourgift.
1.2M
Подписчики
0
Подписки
58.4M
Лайки
1.7K
Ср. просмотры
Вовлечённость: 16.4%
Соединенные Штаты
🗣️ английский
1.2M
Подписчики
58.4M
Всего лайков
1.7K
Ср. просмотры
296
Видео
Оценка доходов
Оценочная цена рекламной публикации: от $6K до $30K, исходя из примерно 5–25 долларов за 1000 подписчиков. Это оценка по размеру аудитории, а не заявленный доход.
Обновлено:
Профиль в TikTok
Последние видео
Последнее видео: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Частые вопросы
Сколько подписчиков у Tim?
На 2026-10-26 у Tim (@letsdrillit) 1.2M подписчиков в TikTok.
Похожие блогеры
Смотреть все →
Лучшие блогеры TikTok (Соединенные Штаты)
Khabane lame
@khaby.lame
#1
- Подписчики
- 163M
- Лайки
- 2.7B
- Просм.
- 28.9M
- ER
- 1.2%
charli d’amelio
@charlidamelio
#2
- Подписчики
- 160.3M
- Лайки
- 12.4B
- Просм.
- 2.1M
- ER
- 2.3%
MrBeast
@mrbeast
#3
- Подписчики
- 145.1M
- Лайки
- 1.6B
- Просм.
- 25.7M
- ER
- 2.3%
TikTok
@tiktok
#4
- Подписчики
- 96.5M
- Лайки
- 465.3M
- Просм.
- 553.7K
- ER
- 0.3%
Bella Poarch
@bellapoarch
#5
- Подписчики
- 91.5M
- Лайки
- 2.4B
- Просм.
- 2.2M
- ER
- 17.4%
Addison Rae
@addisonre
#6
- Подписчики
- 87.6M
- Лайки
- 5.3B
- Просм.
- 8.1M
- ER
- 14.9%
Zach King
@zachking
#7
- Подписчики
- 86.8M
- Лайки
- 1.3B
- Просм.
- 220.6M
- ER
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Подписчики
- 83.4M
- Лайки
- 4.3B
- Просм.
- 5.9M
- ER
- 2.3%
@letsdrillit в подборках
Українська
Tim (@letsdrillit) – Статистика TikTok: 1.2M підписників
Tim (@letsdrillit) — статистика TikTok: 1.2M підписників, 58.4M вподобань, 1.7K переглядів у середньому, залученість 16.4%.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim — автор у TikTok: 1.2M підписників, 58.4M вподобань. У середньому відео набирає 1.7K переглядів, залученість — 16.4%. Найчастіші хештеги: #tiktokshopcybermonday, #tiktokshopblackfriday і #discoveryourgift.
1.2M
Підписники
0
Підписки
58.4M
Вподобання
1.7K
Сер. перегляди
Залученість: 16.4%
Сполучені Штати
🗣️ англійська
1.2M
Підписники
58.4M
Усього вподобань
1.7K
Сер. перегляди
296
Відео
Оцінка доходів
Орієнтовна ціна рекламної публікації: від $6K до $30K, виходячи з приблизно 5–25 доларів за 1000 підписників. Це оцінка за розміром аудиторії, а не заявлений дохід.
Оновлено:
Профіль у TikTok
Останні відео
Останнє відео: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Поширені запитання
Скільки підписників у Tim?
Станом на 2026-10-26 у Tim (@letsdrillit) 1.2M підписників у TikTok.
Схожі блогери
Дивитися всі →
Найкращі блогери TikTok (Сполучені Штати)
Khabane lame
@khaby.lame
#1
- Підписники
- 163M
- Вподобання
- 2.7B
- Перегл.
- 28.9M
- ER
- 1.2%
charli d’amelio
@charlidamelio
#2
- Підписники
- 160.3M
- Вподобання
- 12.4B
- Перегл.
- 2.1M
- ER
- 2.3%
MrBeast
@mrbeast
#3
- Підписники
- 145.1M
- Вподобання
- 1.6B
- Перегл.
- 25.7M
- ER
- 2.3%
TikTok
@tiktok
#4
- Підписники
- 96.5M
- Вподобання
- 465.3M
- Перегл.
- 553.7K
- ER
- 0.3%
Bella Poarch
@bellapoarch
#5
- Підписники
- 91.5M
- Вподобання
- 2.4B
- Перегл.
- 2.2M
- ER
- 17.4%
Addison Rae
@addisonre
#6
- Підписники
- 87.6M
- Вподобання
- 5.3B
- Перегл.
- 8.1M
- ER
- 14.9%
Zach King
@zachking
#7
- Підписники
- 86.8M
- Вподобання
- 1.3B
- Перегл.
- 220.6M
- ER
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Підписники
- 83.4M
- Вподобання
- 4.3B
- Перегл.
- 5.9M
- ER
- 2.3%
@letsdrillit у добірках
Türkçe
Tim (@letsdrillit) – TikTok istatistikleri: 1.2M takipçi
Tim (@letsdrillit) — TikTok istatistikleri: 1.2M takipçi, 58.4M beğeni, 1.7K ortalama izlenme, 16.4% etkileşim.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim, bir TikTok içerik üreticisi: 1.2M takipçi, 58.4M beğeni. Videoları ortalama 1.7K izlenme alıyor; etkileşim oranı 16.4%. En çok kullanılan etiketler: #tiktokshopcybermonday, #tiktokshopblackfriday ve #discoveryourgift.
1.2M
Takipçi
0
Takip
58.4M
Beğeni
1.7K
Ort. izlenme
Etkileşim: 16.4%
Amerika Birleşik Devletleri
🗣️ İngilizce
1.2M
Takipçi
58.4M
Toplam beğeni
1.7K
Ort. izlenme
296
Video
Tahmini kazanç
Sponsorlu gönderi başına tahmini ücret: $6K ile $30K arası; 1.000 takipçi başına yaklaşık 5–25 dolar esas alınmıştır. Bu, kitle büyüklüğüne dayalı bir tahmindir, beyan edilmiş gelir değildir.
Son güncelleme:
TikTok profili
Son videolar
Son video: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Sık sorulan sorular
Tim kaç takipçiye sahip?
2026-10-26 itibarıyla Tim (@letsdrillit) hesabının TikTok'ta 1.2M takipçisi var.
Benzer içerik üreticileri
Tümünü gör →
(Amerika Birleşik Devletleri) en iyi TikTok içerik üreticileri
Khabane lame
@khaby.lame
#1
- Takipçi
- 163M
- Beğeni
- 2.7B
- İzlenme
- 28.9M
- Etkileşim
- 1.2%
charli d’amelio
@charlidamelio
#2
- Takipçi
- 160.3M
- Beğeni
- 12.4B
- İzlenme
- 2.1M
- Etkileşim
- 2.3%
MrBeast
@mrbeast
#3
- Takipçi
- 145.1M
- Beğeni
- 1.6B
- İzlenme
- 25.7M
- Etkileşim
- 2.3%
TikTok
@tiktok
#4
- Takipçi
- 96.5M
- Beğeni
- 465.3M
- İzlenme
- 553.7K
- Etkileşim
- 0.3%
Bella Poarch
@bellapoarch
#5
- Takipçi
- 91.5M
- Beğeni
- 2.4B
- İzlenme
- 2.2M
- Etkileşim
- 17.4%
Addison Rae
@addisonre
#6
- Takipçi
- 87.6M
- Beğeni
- 5.3B
- İzlenme
- 8.1M
- Etkileşim
- 14.9%
Zach King
@zachking
#7
- Takipçi
- 86.8M
- Beğeni
- 1.3B
- İzlenme
- 220.6M
- Etkileşim
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Takipçi
- 83.4M
- Beğeni
- 4.3B
- İzlenme
- 5.9M
- Etkileşim
- 2.3%
@letsdrillit şu listelerde
العربية
Tim (@letsdrillit) – إحصاءات تيك توك: 1.2M متابع | TokRanks
Tim (@letsdrillit) — إحصاءات تيك توك: 1.2M متابع، 58.4M إعجاب، 1.7K مشاهدة في المتوسط، معدل تفاعل 16.4%.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim صانع محتوى على تيك توك، لديه 1.2M متابع و58.4M إعجاب. يحصد كل فيديو في المتوسط 1.7K مشاهدة، بمعدل تفاعل 16.4%. أكثر الوسوم استخدامًا: #tiktokshopcybermonday، #tiktokshopblackfriday و#discoveryourgift.
1.2M
المتابعون
0
يتابع
58.4M
الإعجابات
1.7K
متوسط المشاهدات
معدل التفاعل: 16.4%
الولايات المتحدة
🗣️ الإنجليزية
1.2M
المتابعون
58.4M
إجمالي الإعجابات
1.7K
متوسط المشاهدات
296
الفيديوهات
الأرباح التقديرية
السعر التقديري للمنشور الإعلاني الواحد: من $6K إلى $30K، بناءً على نحو 5 إلى 25 دولارًا لكل 1000 متابع. هذا تقدير مبني على حجم الجمهور وليس دخلًا مُعلنًا.
آخر تحديث:
حساب تيك توك
أحدث الفيديوهات
أحدث فيديو: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
الأسئلة الشائعة
كم عدد متابعي Tim؟
حتى 2026-10-26، لدى Tim (@letsdrillit) 1.2M متابع على تيك توك.
صناع محتوى مشابهون
عرض الكل →
أفضل صناع محتوى تيك توك في الولايات المتحدة
Khabane lame
@khaby.lame
#1
- المتابعون
- 163M
- الإعجابات
- 2.7B
- المشاهدات
- 28.9M
- التفاعل
- 1.2%
charli d’amelio
@charlidamelio
#2
- المتابعون
- 160.3M
- الإعجابات
- 12.4B
- المشاهدات
- 2.1M
- التفاعل
- 2.3%
MrBeast
@mrbeast
#3
- المتابعون
- 145.1M
- الإعجابات
- 1.6B
- المشاهدات
- 25.7M
- التفاعل
- 2.3%
TikTok
@tiktok
#4
- المتابعون
- 96.5M
- الإعجابات
- 465.3M
- المشاهدات
- 553.7K
- التفاعل
- 0.3%
Bella Poarch
@bellapoarch
#5
- المتابعون
- 91.5M
- الإعجابات
- 2.4B
- المشاهدات
- 2.2M
- التفاعل
- 17.4%
Addison Rae
@addisonre
#6
- المتابعون
- 87.6M
- الإعجابات
- 5.3B
- المشاهدات
- 8.1M
- التفاعل
- 14.9%
Zach King
@zachking
#7
- المتابعون
- 86.8M
- الإعجابات
- 1.3B
- المشاهدات
- 220.6M
- التفاعل
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- المتابعون
- 83.4M
- الإعجابات
- 4.3B
- المشاهدات
- 5.9M
- التفاعل
- 2.3%
يظهر @letsdrillit في
اردو
Tim (@letsdrillit) – ٹک ٹاک کے اعداد و شمار: 1.2M فالوورز
Tim (@letsdrillit) — ٹک ٹاک کے اعداد و شمار: 1.2M فالوورز، 58.4M لائکس، 1.7K اوسط ویوز، انگیجمنٹ 16.4%۔
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim ٹک ٹاک کریئیٹر ہیں، 1.2M فالوورز اور 58.4M لائکس کے ساتھ۔ ان کی ویڈیوز کو اوسطاً 1.7K ویوز ملتے ہیں، انگیجمنٹ ریٹ 16.4% ہے۔ سب سے زیادہ استعمال ہونے والے ہیش ٹیگز: #tiktokshopcybermonday، #tiktokshopblackfriday اور #discoveryourgift۔
1.2M
فالوورز
0
فالوونگ
58.4M
لائکس
1.7K
اوسط ویوز
انگیجمنٹ ریٹ: 16.4%
ریاستہائے متحدہ
🗣️ انگریزی
1.2M
فالوورز
58.4M
کل لائکس
1.7K
اوسط ویوز
296
ویڈیوز
اندازہ شدہ آمدنی
فی اسپانسرڈ پوسٹ اندازہ شدہ ریٹ: $6K سے $30K، تقریباً 5 سے 25 ڈالر فی 1,000 فالوورز کی بنیاد پر۔ یہ آڈیئنس کے حجم سے لگایا گیا اندازہ ہے، بتائی گئی آمدنی نہیں۔
آخری اپ ڈیٹ:
ٹک ٹاک پروفائل
حالیہ ویڈیوز
تازہ ترین ویڈیو: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
اکثر پوچھے جانے والے سوالات
Tim کے کتنے فالوورز ہیں؟
2026-10-26 تک Tim (@letsdrillit) کے ٹک ٹاک پر 1.2M فالوورز ہیں۔
ملتے جلتے کریئیٹرز
سب دیکھیں →
ریاستہائے متحدہ میں ٹاپ ٹک ٹاک کریئیٹرز
Khabane lame
@khaby.lame
#1
- فالوورز
- 163M
- لائکس
- 2.7B
- ویوز
- 28.9M
- انگیجمنٹ
- 1.2%
charli d’amelio
@charlidamelio
#2
- فالوورز
- 160.3M
- لائکس
- 12.4B
- ویوز
- 2.1M
- انگیجمنٹ
- 2.3%
MrBeast
@mrbeast
#3
- فالوورز
- 145.1M
- لائکس
- 1.6B
- ویوز
- 25.7M
- انگیجمنٹ
- 2.3%
TikTok
@tiktok
#4
- فالوورز
- 96.5M
- لائکس
- 465.3M
- ویوز
- 553.7K
- انگیجمنٹ
- 0.3%
Bella Poarch
@bellapoarch
#5
- فالوورز
- 91.5M
- لائکس
- 2.4B
- ویوز
- 2.2M
- انگیجمنٹ
- 17.4%
Addison Rae
@addisonre
#6
- فالوورز
- 87.6M
- لائکس
- 5.3B
- ویوز
- 8.1M
- انگیجمنٹ
- 14.9%
Zach King
@zachking
#7
- فالوورز
- 86.8M
- لائکس
- 1.3B
- ویوز
- 220.6M
- انگیجمنٹ
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- فالوورز
- 83.4M
- لائکس
- 4.3B
- ویوز
- 5.9M
- انگیجمنٹ
- 2.3%
@letsdrillit ان فہرستوں میں ہے
हिन्दी
Tim (@letsdrillit) – टिकटॉक आँकड़े: 1.2M फॉलोअर्स | TokRanks
Tim (@letsdrillit) — टिकटॉक आँकड़े: 1.2M फॉलोअर्स, 58.4M लाइक्स, 1.7K औसत व्यूज़, 16.4% एंगेजमेंट।
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim टिकटॉक क्रिएटर हैं, जिनके 1.2M फॉलोअर्स और 58.4M लाइक्स हैं। उनके वीडियो पर औसतन 1.7K व्यूज़ आते हैं और एंगेजमेंट रेट 16.4% है। सबसे ज़्यादा इस्तेमाल होने वाले हैशटैग: #tiktokshopcybermonday, #tiktokshopblackfriday और #discoveryourgift।
1.2M
फॉलोअर्स
0
फॉलोइंग
58.4M
लाइक्स
1.7K
औसत व्यूज़
एंगेजमेंट रेट: 16.4%
संयुक्त राज्य
🗣️ अंग्रेज़ी
1.2M
फॉलोअर्स
58.4M
कुल लाइक्स
1.7K
औसत व्यूज़
296
वीडियो
अनुमानित कमाई
प्रति स्पॉन्सर्ड पोस्ट अनुमानित दर: $6K से $30K, हर 1,000 फॉलोअर्स पर लगभग 5 से 25 डॉलर के आधार पर। यह दर्शकों की संख्या पर आधारित अनुमान है, घोषित आय नहीं।
आख़िरी अपडेट:
टिकटॉक प्रोफ़ाइल
हाल के वीडियो
नवीनतम वीडियो: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
अक्सर पूछे जाने वाले सवाल
Tim के कितने फॉलोअर्स हैं?
2026-10-26 तक Tim (@letsdrillit) के TikTok पर 1.2M फॉलोअर्स हैं।
मिलते-जुलते क्रिएटर
सभी देखें →
संयुक्त राज्य के टॉप टिकटॉक क्रिएटर्स
Khabane lame
@khaby.lame
#1
- फॉलोअर्स
- 163M
- लाइक्स
- 2.7B
- व्यूज़
- 28.9M
- एंगेजमेंट
- 1.2%
charli d’amelio
@charlidamelio
#2
- फॉलोअर्स
- 160.3M
- लाइक्स
- 12.4B
- व्यूज़
- 2.1M
- एंगेजमेंट
- 2.3%
MrBeast
@mrbeast
#3
- फॉलोअर्स
- 145.1M
- लाइक्स
- 1.6B
- व्यूज़
- 25.7M
- एंगेजमेंट
- 2.3%
TikTok
@tiktok
#4
- फॉलोअर्स
- 96.5M
- लाइक्स
- 465.3M
- व्यूज़
- 553.7K
- एंगेजमेंट
- 0.3%
Bella Poarch
@bellapoarch
#5
- फॉलोअर्स
- 91.5M
- लाइक्स
- 2.4B
- व्यूज़
- 2.2M
- एंगेजमेंट
- 17.4%
Addison Rae
@addisonre
#6
- फॉलोअर्स
- 87.6M
- लाइक्स
- 5.3B
- व्यूज़
- 8.1M
- एंगेजमेंट
- 14.9%
Zach King
@zachking
#7
- फॉलोअर्स
- 86.8M
- लाइक्स
- 1.3B
- व्यूज़
- 220.6M
- एंगेजमेंट
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- फॉलोअर्स
- 83.4M
- लाइक्स
- 4.3B
- व्यूज़
- 5.9M
- एंगेजमेंट
- 2.3%
@letsdrillit इन सूचियों में है
বাংলা
Tim (@letsdrillit) – টিকটক পরিসংখ্যান: 1.2M ফলোয়ার | TokRanks
Tim (@letsdrillit) — টিকটক পরিসংখ্যান: 1.2M ফলোয়ার, 58.4M লাইক, 1.7K গড় ভিউ, 16.4% এনগেজমেন্ট।
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim একজন টিকটক ক্রিয়েটর, যাঁর 1.2M ফলোয়ার এবং 58.4M লাইক। তাঁর ভিডিওগুলো গড়ে 1.7K বার দেখা হয়, এনগেজমেন্ট রেট 16.4%। সবচেয়ে বেশি ব্যবহৃত হ্যাশট্যাগ: #tiktokshopcybermonday, #tiktokshopblackfriday ও #discoveryourgift।
1.2M
ফলোয়ার
0
ফলো করছেন
58.4M
লাইক
1.7K
গড় ভিউ
এনগেজমেন্ট রেট: 16.4%
মার্কিন যুক্তরাষ্ট্র
🗣️ ইংরেজি
1.2M
ফলোয়ার
58.4M
মোট লাইক
1.7K
গড় ভিউ
296
ভিডিও
আনুমানিক আয়
প্রতি স্পনসরড পোস্টের আনুমানিক রেট: $6K থেকে $30K, প্রতি ১,০০০ ফলোয়ারে প্রায় ৫ থেকে ২৫ ডলারের ভিত্তিতে। এটি দর্শকসংখ্যার ভিত্তিতে অনুমান, ঘোষিত আয় নয়।
সর্বশেষ আপডেট:
টিকটক প্রোফাইল
সাম্প্রতিক ভিডিও
সর্বশেষ ভিডিও: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
সচরাচর জিজ্ঞাস্য
Tim-এর কত ফলোয়ার?
2026-10-26 পর্যন্ত Tim (@letsdrillit)-এর TikTok-এ 1.2M ফলোয়ার আছে।
একই রকম ক্রিয়েটর
সব দেখুন →
মার্কিন যুক্তরাষ্ট্র-এর সেরা টিকটক ক্রিয়েটর
Khabane lame
@khaby.lame
#1
- ফলোয়ার
- 163M
- লাইক
- 2.7B
- ভিউ
- 28.9M
- এনগেজ
- 1.2%
charli d’amelio
@charlidamelio
#2
- ফলোয়ার
- 160.3M
- লাইক
- 12.4B
- ভিউ
- 2.1M
- এনগেজ
- 2.3%
MrBeast
@mrbeast
#3
- ফলোয়ার
- 145.1M
- লাইক
- 1.6B
- ভিউ
- 25.7M
- এনগেজ
- 2.3%
TikTok
@tiktok
#4
- ফলোয়ার
- 96.5M
- লাইক
- 465.3M
- ভিউ
- 553.7K
- এনগেজ
- 0.3%
Bella Poarch
@bellapoarch
#5
- ফলোয়ার
- 91.5M
- লাইক
- 2.4B
- ভিউ
- 2.2M
- এনগেজ
- 17.4%
Addison Rae
@addisonre
#6
- ফলোয়ার
- 87.6M
- লাইক
- 5.3B
- ভিউ
- 8.1M
- এনগেজ
- 14.9%
Zach King
@zachking
#7
- ফলোয়ার
- 86.8M
- লাইক
- 1.3B
- ভিউ
- 220.6M
- এনগেজ
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- ফলোয়ার
- 83.4M
- লাইক
- 4.3B
- ভিউ
- 5.9M
- এনগেজ
- 2.3%
@letsdrillit যেসব তালিকায় আছেন
नेपाली
Tim (@letsdrillit) – टिकटक तथ्याङ्क: 1.2M फलोअर | TokRanks
Tim (@letsdrillit) — टिकटक तथ्याङ्क: 1.2M फलोअर, 58.4M लाइक, 1.7K औसत भ्यु, 16.4% इन्गेजमेन्ट।
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim टिकटक क्रिएटर हुन्, जसका 1.2M फलोअर र 58.4M लाइक छन्। उनका भिडियोले औसतमा 1.7K भ्यु पाउँछन्, इन्गेजमेन्ट दर 16.4% छ। सबैभन्दा धेरै प्रयोग हुने ह्यासट्याग: #tiktokshopcybermonday, #tiktokshopblackfriday र #discoveryourgift।
1.2M
फलोअर
0
फलो गरेका
58.4M
लाइक
1.7K
औसत भ्यु
इन्गेजमेन्ट दर: 16.4%
संयुक्त राज्य
🗣️ अङ्ग्रेजी
1.2M
फलोअर
58.4M
कुल लाइक
1.7K
औसत भ्यु
296
भिडियो
अनुमानित आम्दानी
प्रति स्पोन्सर्ड पोस्ट अनुमानित दर: $6K देखि $30K, प्रति १,००० फलोअर करिब ५ देखि २५ डलरको आधारमा। यो दर्शकको आकारमा आधारित अनुमान हो, घोषित आम्दानी होइन।
अन्तिम अपडेट:
टिकटक प्रोफाइल
हालका भिडियो
पछिल्लो भिडियो: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
बारम्बार सोधिने प्रश्नहरू
Tim का कति फलोअर छन्?
2026-10-26 सम्म Tim (@letsdrillit) का TikTok मा 1.2M फलोअर छन्।
उस्तै क्रिएटरहरू
सबै हेर्नुहोस् →
संयुक्त राज्यका शीर्ष टिकटक क्रिएटरहरू
Khabane lame
@khaby.lame
#1
- फलोअर
- 163M
- लाइक
- 2.7B
- भ्यु
- 28.9M
- इन्गेज
- 1.2%
charli d’amelio
@charlidamelio
#2
- फलोअर
- 160.3M
- लाइक
- 12.4B
- भ्यु
- 2.1M
- इन्गेज
- 2.3%
MrBeast
@mrbeast
#3
- फलोअर
- 145.1M
- लाइक
- 1.6B
- भ्यु
- 25.7M
- इन्गेज
- 2.3%
TikTok
@tiktok
#4
- फलोअर
- 96.5M
- लाइक
- 465.3M
- भ्यु
- 553.7K
- इन्गेज
- 0.3%
Bella Poarch
@bellapoarch
#5
- फलोअर
- 91.5M
- लाइक
- 2.4B
- भ्यु
- 2.2M
- इन्गेज
- 17.4%
Addison Rae
@addisonre
#6
- फलोअर
- 87.6M
- लाइक
- 5.3B
- भ्यु
- 8.1M
- इन्गेज
- 14.9%
Zach King
@zachking
#7
- फलोअर
- 86.8M
- लाइक
- 1.3B
- भ्यु
- 220.6M
- इन्गेज
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- फलोअर
- 83.4M
- लाइक
- 4.3B
- भ्यु
- 5.9M
- इन्गेज
- 2.3%
@letsdrillit यी सूचीमा छन्
Bahasa Indonesia
Tim (@letsdrillit) – Statistik TikTok: 1.2M pengikut | TokRanks
Tim (@letsdrillit) — statistik TikTok: 1.2M pengikut, 58.4M like, 1.7K rata-rata penayangan, engagement 16.4%.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim adalah kreator TikTok dengan 1.2M pengikut dan 58.4M like. Videonya rata-rata ditonton 1.7K kali, dengan tingkat engagement 16.4%. Hashtag yang paling sering dipakai: #tiktokshopcybermonday, #tiktokshopblackfriday dan #discoveryourgift.
1.2M
Pengikut
0
Mengikuti
58.4M
Like
1.7K
Rata-rata tayangan
Engagement: 16.4%
Amerika Serikat
🗣️ Inggris
1.2M
Pengikut
58.4M
Total like
1.7K
Rata-rata tayangan
296
Video
Perkiraan penghasilan
Perkiraan tarif per postingan berbayar: $6K hingga $30K, dengan asumsi sekitar 5 sampai 25 dolar per 1.000 pengikut. Ini hanya perkiraan dari ukuran audiens, bukan penghasilan yang dilaporkan.
Terakhir diperbarui:
Profil TikTok
Video terbaru
Video terbaru: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Pertanyaan yang sering diajukan
Berapa jumlah pengikut Tim?
Per 2026-10-26, Tim (@letsdrillit) memiliki 1.2M pengikut TikTok.
Kreator serupa
Lihat semua →
Top kreator TikTok di Amerika Serikat
Khabane lame
@khaby.lame
#1
- Pengikut
- 163M
- Like
- 2.7B
- Tayangan
- 28.9M
- Engage
- 1.2%
charli d’amelio
@charlidamelio
#2
- Pengikut
- 160.3M
- Like
- 12.4B
- Tayangan
- 2.1M
- Engage
- 2.3%
MrBeast
@mrbeast
#3
- Pengikut
- 145.1M
- Like
- 1.6B
- Tayangan
- 25.7M
- Engage
- 2.3%
TikTok
@tiktok
#4
- Pengikut
- 96.5M
- Like
- 465.3M
- Tayangan
- 553.7K
- Engage
- 0.3%
Bella Poarch
@bellapoarch
#5
- Pengikut
- 91.5M
- Like
- 2.4B
- Tayangan
- 2.2M
- Engage
- 17.4%
Addison Rae
@addisonre
#6
- Pengikut
- 87.6M
- Like
- 5.3B
- Tayangan
- 8.1M
- Engage
- 14.9%
Zach King
@zachking
#7
- Pengikut
- 86.8M
- Like
- 1.3B
- Tayangan
- 220.6M
- Engage
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Pengikut
- 83.4M
- Like
- 4.3B
- Tayangan
- 5.9M
- Engage
- 2.3%
@letsdrillit masuk dalam
Bahasa Melayu
Tim (@letsdrillit) – Statistik TikTok: 1.2M pengikut | TokRanks
Tim (@letsdrillit) — statistik TikTok: 1.2M pengikut, 58.4M suka, 1.7K purata tontonan, penglibatan 16.4%.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim ialah pencipta kandungan TikTok dengan 1.2M pengikut dan 58.4M suka. Videonya mendapat purata 1.7K tontonan, dengan kadar penglibatan 16.4%. Hashtag paling kerap digunakan: #tiktokshopcybermonday, #tiktokshopblackfriday dan #discoveryourgift.
1.2M
Pengikut
0
Mengikuti
58.4M
Suka
1.7K
Purata tontonan
Penglibatan: 16.4%
Amerika Syarikat
🗣️ Inggeris
1.2M
Pengikut
58.4M
Jumlah suka
1.7K
Purata tontonan
296
Video
Anggaran pendapatan
Anggaran kadar bagi setiap hantaran penajaan: $6K hingga $30K, berdasarkan kira-kira 5 hingga 25 dolar bagi setiap 1,000 pengikut. Ini anggaran berdasarkan saiz audiens, bukan pendapatan yang dilaporkan.
Kemas kini terakhir:
Profil TikTok
Video terkini
Video terbaharu: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Soalan lazim
Berapa ramai pengikut Tim?
Setakat 2026-10-26, Tim (@letsdrillit) mempunyai 1.2M pengikut TikTok.
Pencipta kandungan serupa
Lihat semua →
Top pencipta kandungan TikTok di Amerika Syarikat
Khabane lame
@khaby.lame
#1
- Pengikut
- 163M
- Suka
- 2.7B
- Tontonan
- 28.9M
- Libat
- 1.2%
charli d’amelio
@charlidamelio
#2
- Pengikut
- 160.3M
- Suka
- 12.4B
- Tontonan
- 2.1M
- Libat
- 2.3%
MrBeast
@mrbeast
#3
- Pengikut
- 145.1M
- Suka
- 1.6B
- Tontonan
- 25.7M
- Libat
- 2.3%
TikTok
@tiktok
#4
- Pengikut
- 96.5M
- Suka
- 465.3M
- Tontonan
- 553.7K
- Libat
- 0.3%
Bella Poarch
@bellapoarch
#5
- Pengikut
- 91.5M
- Suka
- 2.4B
- Tontonan
- 2.2M
- Libat
- 17.4%
Addison Rae
@addisonre
#6
- Pengikut
- 87.6M
- Suka
- 5.3B
- Tontonan
- 8.1M
- Libat
- 14.9%
Zach King
@zachking
#7
- Pengikut
- 86.8M
- Suka
- 1.3B
- Tontonan
- 220.6M
- Libat
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Pengikut
- 83.4M
- Suka
- 4.3B
- Tontonan
- 5.9M
- Libat
- 2.3%
@letsdrillit tersenarai dalam
Filipino
Tim (@letsdrillit) – TikTok stats: 1.2M followers | TokRanks
Tim (@letsdrillit) — TikTok stats: 1.2M followers, 58.4M likes, 1.7K average views, 16.4% engagement.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Si Tim ay isang TikTok creator na may 1.2M followers at 58.4M likes. Umaabot sa average na 1.7K views ang mga video niya, na may engagement rate na 16.4%. Pinakamadalas na hashtag: #tiktokshopcybermonday, #tiktokshopblackfriday at #discoveryourgift.
1.2M
Followers
0
Following
58.4M
Likes
1.7K
Avg views
Engagement: 16.4%
Estados Unidos
🗣️ Ingles
1.2M
Followers
58.4M
Kabuuang likes
1.7K
Avg views
296
Mga video
Tinatayang kita
Tinatayang bayad kada sponsored post: $6K hanggang $30K, batay sa humigit-kumulang $5 hanggang $25 kada 1,000 followers. Tantiya ito mula sa laki ng audience, hindi iniulat na kita.
Huling na-update:
TikTok profile
Mga bagong video
Pinakabagong video: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Mga madalas itanong
Ilan ang followers ni Tim?
Hanggang 2026-10-26, may 1.2M TikTok followers si Tim (@letsdrillit).
Mga katulad na creator
Tingnan lahat →
Mga nangungunang TikTok creator sa Estados Unidos
Khabane lame
@khaby.lame
#1
- Followers
- 163M
- Likes
- 2.7B
- Views
- 28.9M
- Engage
- 1.2%
charli d’amelio
@charlidamelio
#2
- Followers
- 160.3M
- Likes
- 12.4B
- Views
- 2.1M
- Engage
- 2.3%
MrBeast
@mrbeast
#3
- Followers
- 145.1M
- Likes
- 1.6B
- Views
- 25.7M
- Engage
- 2.3%
TikTok
@tiktok
#4
- Followers
- 96.5M
- Likes
- 465.3M
- Views
- 553.7K
- Engage
- 0.3%
Bella Poarch
@bellapoarch
#5
- Followers
- 91.5M
- Likes
- 2.4B
- Views
- 2.2M
- Engage
- 17.4%
Addison Rae
@addisonre
#6
- Followers
- 87.6M
- Likes
- 5.3B
- Views
- 8.1M
- Engage
- 14.9%
Zach King
@zachking
#7
- Followers
- 86.8M
- Likes
- 1.3B
- Views
- 220.6M
- Engage
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Followers
- 83.4M
- Likes
- 4.3B
- Views
- 5.9M
- Engage
- 2.3%
Kasama si @letsdrillit sa
Tiếng Việt
Tim (@letsdrillit) – Số liệu TikTok: 1.2M người theo dõi
Tim (@letsdrillit) — số liệu TikTok: 1.2M người theo dõi, 58.4M lượt thích, 1.7K lượt xem trung bình, tỷ lệ tương tác 16.4%.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim là nhà sáng tạo TikTok với 1.2M người theo dõi và 58.4M lượt thích. Mỗi video có trung bình 1.7K lượt xem, tỷ lệ tương tác 16.4%. Hashtag dùng nhiều nhất: #tiktokshopcybermonday, #tiktokshopblackfriday và #discoveryourgift.
1.2M
Người theo dõi
0
Đang theo dõi
58.4M
Lượt thích
1.7K
Lượt xem TB
Tỷ lệ tương tác: 16.4%
Hoa Kỳ
🗣️ Tiếng Anh
1.2M
Người theo dõi
58.4M
Tổng lượt thích
1.7K
Lượt xem TB
296
Video
Thu nhập ước tính
Giá ước tính cho mỗi bài quảng cáo: $6K đến $30K, tính theo khoảng 5 đến 25 USD cho mỗi 1.000 người theo dõi. Đây là ước tính dựa trên quy mô khán giả, không phải thu nhập đã công bố.
Cập nhật lần cuối:
Hồ sơ TikTok
Video gần đây
Video mới nhất: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Câu hỏi thường gặp
Tim có bao nhiêu người theo dõi?
Tính đến 2026-10-26, Tim (@letsdrillit) có 1.2M người theo dõi trên TikTok.
Nhà sáng tạo tương tự
Xem tất cả →
Top nhà sáng tạo TikTok tại Hoa Kỳ
Khabane lame
@khaby.lame
#1
- Người theo dõi
- 163M
- Lượt thích
- 2.7B
- Lượt xem
- 28.9M
- Tương tác
- 1.2%
charli d’amelio
@charlidamelio
#2
- Người theo dõi
- 160.3M
- Lượt thích
- 12.4B
- Lượt xem
- 2.1M
- Tương tác
- 2.3%
MrBeast
@mrbeast
#3
- Người theo dõi
- 145.1M
- Lượt thích
- 1.6B
- Lượt xem
- 25.7M
- Tương tác
- 2.3%
TikTok
@tiktok
#4
- Người theo dõi
- 96.5M
- Lượt thích
- 465.3M
- Lượt xem
- 553.7K
- Tương tác
- 0.3%
Bella Poarch
@bellapoarch
#5
- Người theo dõi
- 91.5M
- Lượt thích
- 2.4B
- Lượt xem
- 2.2M
- Tương tác
- 17.4%
Addison Rae
@addisonre
#6
- Người theo dõi
- 87.6M
- Lượt thích
- 5.3B
- Lượt xem
- 8.1M
- Tương tác
- 14.9%
Zach King
@zachking
#7
- Người theo dõi
- 86.8M
- Lượt thích
- 1.3B
- Lượt xem
- 220.6M
- Tương tác
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Người theo dõi
- 83.4M
- Lượt thích
- 4.3B
- Lượt xem
- 5.9M
- Tương tác
- 2.3%
@letsdrillit có mặt trong
ไทย
Tim (@letsdrillit) – สถิติ TikTok: ผู้ติดตาม 1.2M | TokRanks
Tim (@letsdrillit) — สถิติ TikTok: ผู้ติดตาม 1.2M ยอดไลก์ 58.4M ยอดวิวเฉลี่ย 1.7K อัตราการมีส่วนร่วม 16.4%
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim เป็นครีเอเตอร์ TikTok มีผู้ติดตาม 1.2M และยอดไลก์ 58.4M วิดีโอมียอดวิวเฉลี่ย 1.7K ครั้ง อัตราการมีส่วนร่วม 16.4% แฮชแท็กที่ใช้บ่อยที่สุด: #tiktokshopcybermonday #tiktokshopblackfriday และ #discoveryourgift
1.2M
ผู้ติดตาม
0
กำลังติดตาม
58.4M
ยอดไลก์
1.7K
ยอดวิวเฉลี่ย
อัตราการมีส่วนร่วม: 16.4%
สหรัฐอเมริกา
🗣️ อังกฤษ
1.2M
ผู้ติดตาม
58.4M
ยอดไลก์รวม
1.7K
ยอดวิวเฉลี่ย
296
วิดีโอ
รายได้โดยประมาณ
ค่าโพสต์สปอนเซอร์โดยประมาณ: $6K ถึง $30K คำนวณจากราว 5–25 ดอลลาร์ต่อผู้ติดตาม 1,000 คน เป็นเพียงการประมาณจากขนาดผู้ชม ไม่ใช่รายได้ที่รายงานจริง
อัปเดตล่าสุด:
โปรไฟล์ TikTok
วิดีโอล่าสุด
วิดีโอล่าสุด: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
คำถามที่พบบ่อย
Tim มีผู้ติดตามกี่คน
ณ วันที่ 2026-10-26 Tim (@letsdrillit) มีผู้ติดตามบน TikTok 1.2M
ครีเอเตอร์ที่คล้ายกัน
ดูทั้งหมด →
อันดับครีเอเตอร์ TikTok ในสหรัฐอเมริกา
Khabane lame
@khaby.lame
#1
- ผู้ติดตาม
- 163M
- ยอดไลก์
- 2.7B
- ยอดวิว
- 28.9M
- มีส่วนร่วม
- 1.2%
charli d’amelio
@charlidamelio
#2
- ผู้ติดตาม
- 160.3M
- ยอดไลก์
- 12.4B
- ยอดวิว
- 2.1M
- มีส่วนร่วม
- 2.3%
MrBeast
@mrbeast
#3
- ผู้ติดตาม
- 145.1M
- ยอดไลก์
- 1.6B
- ยอดวิว
- 25.7M
- มีส่วนร่วม
- 2.3%
TikTok
@tiktok
#4
- ผู้ติดตาม
- 96.5M
- ยอดไลก์
- 465.3M
- ยอดวิว
- 553.7K
- มีส่วนร่วม
- 0.3%
Bella Poarch
@bellapoarch
#5
- ผู้ติดตาม
- 91.5M
- ยอดไลก์
- 2.4B
- ยอดวิว
- 2.2M
- มีส่วนร่วม
- 17.4%
Addison Rae
@addisonre
#6
- ผู้ติดตาม
- 87.6M
- ยอดไลก์
- 5.3B
- ยอดวิว
- 8.1M
- มีส่วนร่วม
- 14.9%
Zach King
@zachking
#7
- ผู้ติดตาม
- 86.8M
- ยอดไลก์
- 1.3B
- ยอดวิว
- 220.6M
- มีส่วนร่วม
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- ผู้ติดตาม
- 83.4M
- ยอดไลก์
- 4.3B
- ยอดวิว
- 5.9M
- มีส่วนร่วม
- 2.3%
@letsdrillit อยู่ในรายการ
ខ្មែរ
Tim (@letsdrillit) – ស្ថិតិ TikTok: អ្នកតាមដាន 1.2M | TokRanks
Tim (@letsdrillit) — ស្ថិតិ TikTok: អ្នកតាមដាន 1.2M ការចូលចិត្ត 58.4M ការមើលជាមធ្យម 1.7K អត្រាចូលរួម 16.4%។
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim គឺជាអ្នកបង្កើតមាតិកា TikTok ដែលមានអ្នកតាមដាន 1.2M និងការចូលចិត្ត 58.4M។ វីដេអូនីមួយៗទទួលបានការមើលជាមធ្យម 1.7K ដង ជាមួយអត្រាចូលរួម 16.4%។ ហាស់ថេកដែលប្រើញឹកញាប់បំផុត៖ #tiktokshopcybermonday #tiktokshopblackfriday និង #discoveryourgift។
1.2M
អ្នកតាមដាន
0
កំពុងតាមដាន
58.4M
ការចូលចិត្ត
1.7K
ការមើលជាមធ្យម
អត្រាចូលរួម: 16.4%
សហរដ្ឋអាមេរិក
🗣️ អង់គ្លេស
1.2M
អ្នកតាមដាន
58.4M
ការចូលចិត្តសរុប
1.7K
ការមើលជាមធ្យម
296
វីដេអូ
ប្រាក់ចំណូលប៉ាន់ស្មាន
តម្លៃប៉ាន់ស្មានក្នុងមួយប្រកាសឧបត្ថម្ភ: $6K ដល់ $30K គណនាតាមប្រហែល 5 ដល់ 25 ដុល្លារក្នុងអ្នកតាមដាន 1,000 នាក់។ នេះជាការប៉ាន់ស្មានតាមទំហំទស្សនិកជន មិនមែនជាប្រាក់ចំណូលដែលបានរាយការណ៍ទេ។
ធ្វើបច្ចុប្បន្នភាពចុងក្រោយ:
ប្រវត្តិរូប TikTok
វីដេអូថ្មីៗ
វីដេអូថ្មីបំផុត: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
សំណួរដែលសួរញឹកញាប់
Tim មានអ្នកតាមដានប៉ុន្មាននាក់?
គិតត្រឹមថ្ងៃទី 2026-10-26 Tim (@letsdrillit) មានអ្នកតាមដាន TikTok 1.2M។
អ្នកបង្កើតមាតិកាស្រដៀងគ្នា
មើលទាំងអស់ →
អ្នកបង្កើតមាតិកា TikTok ពេញនិយមបំផុតនៅសហរដ្ឋអាមេរិក
Khabane lame
@khaby.lame
#1
- អ្នកតាមដាន
- 163M
- ការចូលចិត្ត
- 2.7B
- ការមើល
- 28.9M
- ចូលរួម
- 1.2%
charli d’amelio
@charlidamelio
#2
- អ្នកតាមដាន
- 160.3M
- ការចូលចិត្ត
- 12.4B
- ការមើល
- 2.1M
- ចូលរួម
- 2.3%
MrBeast
@mrbeast
#3
- អ្នកតាមដាន
- 145.1M
- ការចូលចិត្ត
- 1.6B
- ការមើល
- 25.7M
- ចូលរួម
- 2.3%
TikTok
@tiktok
#4
- អ្នកតាមដាន
- 96.5M
- ការចូលចិត្ត
- 465.3M
- ការមើល
- 553.7K
- ចូលរួម
- 0.3%
Bella Poarch
@bellapoarch
#5
- អ្នកតាមដាន
- 91.5M
- ការចូលចិត្ត
- 2.4B
- ការមើល
- 2.2M
- ចូលរួម
- 17.4%
Addison Rae
@addisonre
#6
- អ្នកតាមដាន
- 87.6M
- ការចូលចិត្ត
- 5.3B
- ការមើល
- 8.1M
- ចូលរួម
- 14.9%
Zach King
@zachking
#7
- អ្នកតាមដាន
- 86.8M
- ការចូលចិត្ត
- 1.3B
- ការមើល
- 220.6M
- ចូលរួម
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- អ្នកតាមដាន
- 83.4M
- ការចូលចិត្ត
- 4.3B
- ការមើល
- 5.9M
- ចូលរួម
- 2.3%
@letsdrillit មាននៅក្នុង
မြန်မာ
Tim (@letsdrillit) – TikTok စာရင်းအင်း: ဖော်လိုဝါ 1.2M | TokRanks
Tim (@letsdrillit) — TikTok စာရင်းအင်း: ဖော်လိုဝါ 1.2M၊ Like 58.4M၊ ပျမ်းမျှကြည့်ရှုမှု 1.7K၊ ထိတွေ့ဆက်ဆံမှု 16.4%။
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim သည် TikTok ဖန်တီးသူဖြစ်ပြီး ဖော်လိုဝါ 1.2M၊ Like 58.4M ရှိသည်။ ဗီဒီယိုတစ်ခုလျှင် ပျမ်းမျှ ကြည့်ရှုမှု 1.7K ကြိမ်ရှိပြီး ထိတွေ့ဆက်ဆံမှုနှုန်း 16.4% ဖြစ်သည်။ အသုံးအများဆုံး hashtag များ - #tiktokshopcybermonday၊ #tiktokshopblackfriday နှင့် #discoveryourgift။
1.2M
ဖော်လိုဝါ
0
ဖော်လိုလုပ်ထားသူ
58.4M
Like
1.7K
ပျမ်းမျှကြည့်ရှုမှု
ထိတွေ့ဆက်ဆံမှုနှုန်း: 16.4%
အမေရိကန် ပြည်ထောင်စု
🗣️ အင်္ဂလိပ်
1.2M
ဖော်လိုဝါ
58.4M
Like စုစုပေါင်း
1.7K
ပျမ်းမျှကြည့်ရှုမှု
296
ဗီဒီယို
ခန့်မှန်း ဝင်ငွေ
စပွန်ဆာ ပို့စ်တစ်ခုလျှင် ခန့်မှန်းနှုန်း: $6K မှ $30K ၊ ဖော်လိုဝါ ၁,၀၀၀ လျှင် ဒေါ်လာ ၅ မှ ၂၅ ခန့်ကို အခြေခံသည်။ ၎င်းသည် ပရိသတ်အရွယ်အစားအပေါ် အခြေခံသော ခန့်မှန်းချက်သာဖြစ်ပြီး ထုတ်ပြန်ထားသော ဝင်ငွေ မဟုတ်ပါ။
နောက်ဆုံး အပ်ဒိတ်:
TikTok ပရိုဖိုင်
နောက်ဆုံး ဗီဒီယိုများ
နောက်ဆုံး ဗီဒီယို: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
မကြာခဏ မေးလေ့ရှိသော မေးခွန်းများ
Tim တွင် ဖော်လိုဝါ ဘယ်လောက်ရှိသလဲ?
2026-10-26 အထိ Tim (@letsdrillit) တွင် TikTok ဖော်လိုဝါ 1.2M ရှိသည်။
ဆင်တူ ဖန်တီးသူများ
အားလုံးကြည့်ရန် →
အမေရိကန် ပြည်ထောင်စုရှိ ထိပ်တန်း TikTok ဖန်တီးသူများ
Khabane lame
@khaby.lame
#1
- ဖော်လိုဝါ
- 163M
- Like
- 2.7B
- ကြည့်ရှုမှု
- 28.9M
- ထိတွေ့မှု
- 1.2%
charli d’amelio
@charlidamelio
#2
- ဖော်လိုဝါ
- 160.3M
- Like
- 12.4B
- ကြည့်ရှုမှု
- 2.1M
- ထိတွေ့မှု
- 2.3%
MrBeast
@mrbeast
#3
- ဖော်လိုဝါ
- 145.1M
- Like
- 1.6B
- ကြည့်ရှုမှု
- 25.7M
- ထိတွေ့မှု
- 2.3%
TikTok
@tiktok
#4
- ဖော်လိုဝါ
- 96.5M
- Like
- 465.3M
- ကြည့်ရှုမှု
- 553.7K
- ထိတွေ့မှု
- 0.3%
Bella Poarch
@bellapoarch
#5
- ဖော်လိုဝါ
- 91.5M
- Like
- 2.4B
- ကြည့်ရှုမှု
- 2.2M
- ထိတွေ့မှု
- 17.4%
Addison Rae
@addisonre
#6
- ဖော်လိုဝါ
- 87.6M
- Like
- 5.3B
- ကြည့်ရှုမှု
- 8.1M
- ထိတွေ့မှု
- 14.9%
Zach King
@zachking
#7
- ဖော်လိုဝါ
- 86.8M
- Like
- 1.3B
- ကြည့်ရှုမှု
- 220.6M
- ထိတွေ့မှု
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- ဖော်လိုဝါ
- 83.4M
- Like
- 4.3B
- ကြည့်ရှုမှု
- 5.9M
- ထိတွေ့မှု
- 2.3%
@letsdrillit ပါဝင်သော စာရင်းများ
日本語
Tim (@letsdrillit) – TikTok統計: フォロワー1.2M | TokRanks
Tim (@letsdrillit) — TikTok統計: フォロワー1.2M、いいね58.4M、平均再生数1.7K、エンゲージメント率16.4%。#tiktokshopcybermondayと#tiktokshopblackfridayについて投稿するアメリカ合衆国のTikTokクリエイター。毎日更新。
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
TimはTikTokクリエイターで、フォロワー1.2M、いいね58.4M。動画の平均再生数は1.7K回、エンゲージメント率は16.4%です。よく使うハッシュタグ：#tiktokshopcybermonday、#tiktokshopblackfridayと#discoveryourgift。
1.2M
フォロワー
0
フォロー中
58.4M
いいね
1.7K
平均再生数
エンゲージメント率: 16.4%
アメリカ合衆国
🗣️ 英語
1.2M
フォロワー
58.4M
いいね合計
1.7K
平均再生数
296
動画
推定収益
タイアップ投稿1件あたりの推定単価：$6K〜$30K（フォロワー1,000人あたり約5〜25ドルで計算）。オーディエンス規模からの推定であり、公表された収入ではありません。
最終更新:
TikTokプロフィール
最近の動画
最新の動画：2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
よくある質問
Timのフォロワー数は？
2026-10-26時点で、Tim（@letsdrillit）のTikTokフォロワーは1.2Mです。
似ているクリエイター
すべて見る →
アメリカ合衆国の人気TikTokクリエイターランキング
Khabane lame
@khaby.lame
#1
- フォロワー
- 163M
- いいね
- 2.7B
- 再生
- 28.9M
- エンゲージ
- 1.2%
charli d’amelio
@charlidamelio
#2
- フォロワー
- 160.3M
- いいね
- 12.4B
- 再生
- 2.1M
- エンゲージ
- 2.3%
MrBeast
@mrbeast
#3
- フォロワー
- 145.1M
- いいね
- 1.6B
- 再生
- 25.7M
- エンゲージ
- 2.3%
TikTok
@tiktok
#4
- フォロワー
- 96.5M
- いいね
- 465.3M
- 再生
- 553.7K
- エンゲージ
- 0.3%
Bella Poarch
@bellapoarch
#5
- フォロワー
- 91.5M
- いいね
- 2.4B
- 再生
- 2.2M
- エンゲージ
- 17.4%
Addison Rae
@addisonre
#6
- フォロワー
- 87.6M
- いいね
- 5.3B
- 再生
- 8.1M
- エンゲージ
- 14.9%
Zach King
@zachking
#7
- フォロワー
- 86.8M
- いいね
- 1.3B
- 再生
- 220.6M
- エンゲージ
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- フォロワー
- 83.4M
- いいね
- 4.3B
- 再生
- 5.9M
- エンゲージ
- 2.3%
@letsdrillitが掲載されているリスト
한국어
Tim (@letsdrillit) – 틱톡 통계: 팔로워 1.2M | TokRanks
Tim (@letsdrillit) — 틱톡 통계: 팔로워 1.2M, 좋아요 58.4M, 평균 조회수 1.7K, 참여율 16.4%. #tiktokshopcybermonday 및 #tiktokshopblackfriday 콘텐츠를 올리는 미국 틱톡 크리에이터. 매일 업데이트.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim은(는) 틱톡 크리에이터로, 팔로워 1.2M, 좋아요 58.4M입니다. 동영상 평균 조회수는 1.7K회, 참여율은 16.4%입니다. 자주 쓰는 해시태그: #tiktokshopcybermonday, #tiktokshopblackfriday 및 #discoveryourgift.
1.2M
팔로워
0
팔로잉
58.4M
좋아요
1.7K
평균 조회수
참여율: 16.4%
미국
🗣️ 영어
1.2M
팔로워
58.4M
총 좋아요
1.7K
평균 조회수
296
동영상
예상 수익
광고 게시물 1건당 예상 단가: $6K~$30K (팔로워 1,000명당 약 5~25달러 기준). 시청자 규모로 추정한 값이며 공개된 수입이 아닙니다.
마지막 업데이트:
틱톡 프로필
최근 동영상
최신 영상: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
자주 묻는 질문
Tim의 팔로워는 몇 명인가요?
2026-10-26 기준 Tim(@letsdrillit)의 TikTok 팔로워는 1.2M명입니다.
비슷한 크리에이터
모두 보기 →
미국 인기 틱톡 크리에이터 순위
Khabane lame
@khaby.lame
#1
- 팔로워
- 163M
- 좋아요
- 2.7B
- 조회수
- 28.9M
- 참여율
- 1.2%
charli d’amelio
@charlidamelio
#2
- 팔로워
- 160.3M
- 좋아요
- 12.4B
- 조회수
- 2.1M
- 참여율
- 2.3%
MrBeast
@mrbeast
#3
- 팔로워
- 145.1M
- 좋아요
- 1.6B
- 조회수
- 25.7M
- 참여율
- 2.3%
TikTok
@tiktok
#4
- 팔로워
- 96.5M
- 좋아요
- 465.3M
- 조회수
- 553.7K
- 참여율
- 0.3%
Bella Poarch
@bellapoarch
#5
- 팔로워
- 91.5M
- 좋아요
- 2.4B
- 조회수
- 2.2M
- 참여율
- 17.4%
Addison Rae
@addisonre
#6
- 팔로워
- 87.6M
- 좋아요
- 5.3B
- 조회수
- 8.1M
- 참여율
- 14.9%
Zach King
@zachking
#7
- 팔로워
- 86.8M
- 좋아요
- 1.3B
- 조회수
- 220.6M
- 참여율
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- 팔로워
- 83.4M
- 좋아요
- 4.3B
- 조회수
- 5.9M
- 참여율
- 2.3%
@letsdrillit이(가) 포함된 목록
አማርኛ
Tim (@letsdrillit) – የቲክቶክ ስታቲስቲክስ: 1.2M ተከታዮች | TokRanks
Tim (@letsdrillit) — የቲክቶክ ስታቲስቲክስ: 1.2M ተከታዮች፣ 58.4M ላይኮች፣ 1.7K አማካይ እይታዎች፣ 16.4% ተሳትፎ።
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim የቲክቶክ ይዘት ፈጣሪ ሲሆኑ 1.2M ተከታዮች እና 58.4M ላይኮች አሏቸው። ቪዲዮዎቻቸው በአማካይ 1.7K እይታ ያገኛሉ፤ የተሳትፎ መጠናቸው 16.4% ነው። በብዛት የሚጠቀሙባቸው ሃሽታጎች፦ #tiktokshopcybermonday፣ #tiktokshopblackfriday እና #discoveryourgift።
1.2M
ተከታዮች
0
የሚከተሏቸው
58.4M
ላይኮች
1.7K
አማካይ እይታ
የተሳትፎ መጠን: 16.4%
ዩናይትድ ስቴትስ
🗣️ እንግሊዝኛ
1.2M
ተከታዮች
58.4M
ጠቅላላ ላይኮች
1.7K
አማካይ እይታ
296
ቪዲዮዎች
የተገመተ ገቢ
ለአንድ የስፖንሰር ልጥፍ የተገመተ ዋጋ፦ ከ$6K እስከ $30K፣ በ1,000 ተከታዮች ከ5 እስከ 25 ዶላር በሚሆን ግምት። ይህ በታዳሚ መጠን ላይ የተመሠረተ ግምት እንጂ የተገለጸ ገቢ አይደለም።
ለመጨረሻ ጊዜ የተዘመነው:
የቲክቶክ መገለጫ
የቅርብ ጊዜ ቪዲዮዎች
የቅርብ ጊዜ ቪዲዮ፦ 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
በተደጋጋሚ የሚጠየቁ ጥያቄዎች
Tim ስንት ተከታዮች አሉት?
እስከ 2026-10-26 ድረስ Tim (@letsdrillit) 1.2M የቲክቶክ ተከታዮች አሉት።
ተመሳሳይ ይዘት ፈጣሪዎች
ሁሉንም ይመልከቱ →
በዩናይትድ ስቴትስ ምርጥ የቲክቶክ ይዘት ፈጣሪዎች
Khabane lame
@khaby.lame
#1
- ተከታዮች
- 163M
- ላይኮች
- 2.7B
- እይታዎች
- 28.9M
- ተሳትፎ
- 1.2%
charli d’amelio
@charlidamelio
#2
- ተከታዮች
- 160.3M
- ላይኮች
- 12.4B
- እይታዎች
- 2.1M
- ተሳትፎ
- 2.3%
MrBeast
@mrbeast
#3
- ተከታዮች
- 145.1M
- ላይኮች
- 1.6B
- እይታዎች
- 25.7M
- ተሳትፎ
- 2.3%
TikTok
@tiktok
#4
- ተከታዮች
- 96.5M
- ላይኮች
- 465.3M
- እይታዎች
- 553.7K
- ተሳትፎ
- 0.3%
Bella Poarch
@bellapoarch
#5
- ተከታዮች
- 91.5M
- ላይኮች
- 2.4B
- እይታዎች
- 2.2M
- ተሳትፎ
- 17.4%
Addison Rae
@addisonre
#6
- ተከታዮች
- 87.6M
- ላይኮች
- 5.3B
- እይታዎች
- 8.1M
- ተሳትፎ
- 14.9%
Zach King
@zachking
#7
- ተከታዮች
- 86.8M
- ላይኮች
- 1.3B
- እይታዎች
- 220.6M
- ተሳትፎ
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- ተከታዮች
- 83.4M
- ላይኮች
- 4.3B
- እይታዎች
- 5.9M
- ተሳትፎ
- 2.3%
@letsdrillit የሚገኝባቸው ዝርዝሮች
Soomaali
Tim (@letsdrillit) – Tirakoobka TikTok: 1.2M taageere | TokRanks
Tim (@letsdrillit) — tirakoobka TikTok: 1.2M taageere, 58.4M like, 1.7K daawasho celcelis ahaan, 16.4% ka-qaybgal.
le
Tim
@letsdrillit
Home & tech finds you'll love 🏠🔌 Check my Showcase ⬇️
Tim waa abuure TikTok oo leh 1.2M taageere iyo 58.4M like. Fiidiyowyadiisu waxay helaan celcelis ahaan 1.7K daawasho, heerka ka-qaybgalkuna waa 16.4%. Hashtag-yada ugu badan ee la isticmaalo: #tiktokshopcybermonday, #tiktokshopblackfriday iyo #discoveryourgift.
1.2M
Taageerayaal
0
Uu raaco
58.4M
Like
1.7K
Celceliska daawashada
Heerka ka-qaybgalka: 16.4%
Maraykanka
🗣️ Ingiriisi
1.2M
Taageerayaal
58.4M
Wadarta like-ka
1.7K
Celceliska daawashada
296
Fiidiyowyo
Dakhliga la qiyaasay
Qiimaha la qiyaasay ee boosteyaasha kafaala-qaadka ah: $6K ilaa $30K, iyadoo lagu salaynayo qiyaastii 5 ilaa 25 doolar 1,000 taageere kasta. Waa qiyaas ku salaysan cabbirka daawadayaasha, ma aha dakhli la shaaciyay.
Markii ugu dambeysay la cusboonaysiiyay:
Profile-ka TikTok
Fiidiyowyadii ugu dambeeyay
Fiidiyowga ugu dambeeyay: 2026-10-22
▶
Printing in 4 colors without babysitting the printer all day is what this new Creality K3 3D printer does. It has 4 nozzles loaded and it swaps colors in under five seconds, and you can start the print from your phone and watch it live on the camera inside. It is CoreXY with a 256 by 256 by 256 build volume and it prints PLA and PETG and PCTG and TPU. This is the printer I use when the print needs more than one color in it. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
This is the Creality K3 3D printer and the nozzles change themselves. It loads 4 colors at a time and swaps between them in under five seconds while the print keeps running. You start it and the machine handles every color change on its own. This is how multicolor printing should have worked all along. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
▶
Multicolor prints on a regular printer waste filament at every color change and the hours stack up. This Creality K3 3D printer runs 4 colors off 4 nozzles so prints finish way faster and way less filament ends up wasted. You get more finished prints and a lot less plastic in the trash. That is why this one is in my garage. #TikTokShopBlackFriday #discoveryourgift #TikTokShopCyberMonday
Su'aalaha inta badan la weydiiyo
Immisa taageere ayuu leeyahay Tim?
Illaa 2026-10-26, Tim (@letsdrillit) wuxuu leeyahay 1.2M taageere oo TikTok ah.
Abuurayaal la mid ah
Arag dhammaan →
Abuurayaasha TikTok ugu sarreeya ee Maraykanka
Khabane lame
@khaby.lame
#1
- Taageerayaal
- 163M
- Like
- 2.7B
- Daawasho
- 28.9M
- Ka-qaybgal
- 1.2%
charli d’amelio
@charlidamelio
#2
- Taageerayaal
- 160.3M
- Like
- 12.4B
- Daawasho
- 2.1M
- Ka-qaybgal
- 2.3%
MrBeast
@mrbeast
#3
- Taageerayaal
- 145.1M
- Like
- 1.6B
- Daawasho
- 25.7M
- Ka-qaybgal
- 2.3%
TikTok
@tiktok
#4
- Taageerayaal
- 96.5M
- Like
- 465.3M
- Daawasho
- 553.7K
- Ka-qaybgal
- 0.3%
Bella Poarch
@bellapoarch
#5
- Taageerayaal
- 91.5M
- Like
- 2.4B
- Daawasho
- 2.2M
- Ka-qaybgal
- 17.4%
Addison Rae
@addisonre
#6
- Taageerayaal
- 87.6M
- Like
- 5.3B
- Daawasho
- 8.1M
- Ka-qaybgal
- 14.9%
Zach King
@zachking
#7
- Taageerayaal
- 86.8M
- Like
- 1.3B
- Daawasho
- 220.6M
- Ka-qaybgal
- 2.4%
Kimberly Loaiza
@kimberly.loaiza
#8
- Taageerayaal
- 83.4M
- Like
- 4.3B
- Daawasho
- 5.9M
- Ka-qaybgal
- 2.3%